780260
13
Zoom out
Zoom in
Previous page
1/21
Next page
L2 / L3 Remote Lever 13
EN
4.4 INSTALLING THE CABLE ON THE L3 REMOTE LEVER
1. Take the user manual of the component that is to be operated by the remote lever and check it for
information on how to mount the cable.
2. Screw in the cable adjuster (1) fully and then turn
it back out two turns.
This achieves the greatest adjustment
range.
3. Put a ferrule on the end of the cable
housing and insert the cable housing
into the cable adjuster (1) of the
remote lever.
4. Use a 2.5 mm hex key to unscrew the clamping screw (2) for the cable on the remote lever by a few
turns.
5. Push the cable through the cable adjuster (1) and push the cable end through the remote lever.
6. Pull the cable tight and screw in the clamping screw (2) to clamp the cable.
7. Adjust the cable adjuster (1) until there is sufcient cable tension to remove play at the remote
lever.
8. Trim off the protruding end of the cable and t a cable end crimp on the cable.
1
2
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DT Swiss L2 Remote Lever at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DT Swiss L2 Remote Lever in the language / languages: English, German, French as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info