716459

DS Produkte Z06691 Manual

13
Zoom out
Zoom in
Previous page
1/28
Next page
13 EN
Use
• If your tin has an opening ring, open the bottom of the tin with the tin opener
and not the top.
• The cutting blade will not work if it is not properly positioned on the edge of
the tin.
• The tin opener cuts on the tin lid edge. This prevents sharp edges from forming!
1. Place the cutting blade on the edge of the tin from
the outside as shown. For this, the tin opener must
be located on the lid (see fi gure).
2. Push the On/Off button. The motor will activate and
the tin opener will cut open the lid.
3. Once the cutting blade has run around the edge of
the tin, the motor may be deactivated. For this, push
the On/Off button again.
4. Take the tin opener off of the tin. The lid will be removed directly by the magnet on
the bottom of the tin opener.
Cleaning and storage
ATTENTION!
■ Risk of injury! The cutting blade is sharp!
■ Before cleaning the cutting blade, take the batteries out of the tin opener.
■ Do not use any scouring or abrasive cleaners or cleaning pads to clean the product.
■ The product is not suitable for the dishwasher!
• If needed, clean the cutting blade and the casing with a damp cloth and if necessary,
using a small amount of cleaner. Then dry them with a soft cloth.
• Store the product in a dry, clean area that is not accessible to children.
Troubleshooting
If the device stops working properly, fi rst check whether you are able to correct the
problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem Potential cause / solution
The product
only oper-
ates slowly
or not at all.
• Have the batteries been inserted? Insert four 1.5 V batteries,
type AA in the product (see the “Inserting / changing batteries”
chapter).
• Are the inserted batteries empty? Change the batteries (see the
“Inserting / changing batteries” chapter).
• Is the cutting blade properly positioned on the edge of the tin? Make
sure that the cutting blade is located on the outside of the tin edge.
In the process, the tin opener is positioned on top of the tin lid.
Touch_Go_DE-EN-FR-NL_A5_V3.indb 13Touch_Go_DE-EN-FR-NL_A5_V3.indb 13 14.01.2016 13:14:5214.01.2016 13:14:52
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DS Produkte Z06691 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DS Produkte Z06691 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info