Start-up
• Remove the device from the packaging and check if all components are present.
If this is not the case, contact our customer service centre.
Selecting an adapter
Extension tube (5)
Use these tubes in order to extend the length of the unit.
1. Hold down the button on the handle end and slide an
extension tube onto the handle end until the button
locks into place in the recess on the extension tube.
2. If you wish to use another extension tube, press down
the button on the end of the extension tube, which you
have just mounted, and mount the second extension tube
in the same manner.
Small, round brush head (7)
A round brush head is included with the unit. It is suitable for cleaning hard to reach
areas, e.g. tiles as well as areas with heavy dirt.
Use the brush head with caution! Otherwise, the surfaces to be
cleaned may be damaged!
1. Hold down the button on the hose resp. tube end and
mount the tile nozzle (6) such that it locks into place.
For this, the button must lock into the recess on the
adapter in the process.
2. Now screw the desired brush onto the adapter.
You can also use the tile nozzle without brushes.
Floor adapter (8)
Each time before using the unit, check the terry cloth pad (9) for
wear. It may not be used if it is worn out!
You can use the oor adapter with or without the terry cloth pad. We recommend
using the oor adapter with a pad e.g. on carpet oors and the cleaning pad on
smooth oors such as tiles, laminate, etc.
1. Mount the extension tubes (5) on the handle end as described under “Extension
tubes” and then mount the oor adapter (8) on the extension tube. You can, as
needed, also use the adapter without an extension tube.
