810292
23
Zoom out
Zoom in
Previous page
1/40
Next page
23
4.3.3 Back and side wall adjacent to the glass of the side pane
When constructing the wall up to the side pane, proceed as follows:
Make sure the back wall to be placed has the correct dimensions (see g. 4-10 and 4-11).
Maintain a 5 mm distance between the wall and the side pane.
- In case of materials up to the glass, heat-resistant material should be used that is at least able to resist
temperatures of 85°C.
For each appliance there are specic steps to connect the side wall to the glass. Observe the next steps
that apply to the appliance to be placed.
Virtuo 75
Side wall adjacent to the glass:
Remove the vertical decorative strip on the left and right side by removing the 2 recessed-head screws and 2 self-tapping
screws (see g. 4-9 Step 1).
Screw the 2 self-tapping screws back in the appliance.
Remove the centring block at the ends of the upper and lower decorative strip by cutting into it and breaking it o
(see g. 4-9 step 5).
Ensure a margin of at least 5mm between the wall and the glass pane.
Virtuo 80/2
Side wall adjacent to the glass:
Remove the vertical decorative strip on the left and right side by removing the 2 recessed-head screws and 2 self-tapping
screws (see g. 4-9 Step 1).
Screw the 2 self-tapping screws back in the appliance.
Remove the centring block at the ends of the upper and lower decorative strip by cutting into it and breaking it o
(see g. 4-9 step 5).
Ensure a margin of at least 5mm between the wall and the glass pane.
Back wall adjacent to the glass:
Move the vertical decorative strip (see g. 4-9 Step 4) by loosening the two bolts by a few turns. Place it at the required
depth and tighten the bolts again.
Place the wall between the upper and lower decorative strip (see g. 4-10).
Ensure a margin of at least 5mm between the wall and the glass pane.
Virtuo 80/3
Back wall adjacent to the glass:
Move the vertical decorative strip (see g. 4-9 Step 4) by loosening the two bolts by a few turns. Place it at the required
depth and tighten the bolts again.
Place the wall between the upper and lower decorative strip (see g. 4-10).
Repeat the above-mentioned steps for the other side, if applicable in the conguration.
Ensure a margin of at least 5mm between the wall and the glass pane.
installation manual
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Virtuo 75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Virtuo 75 in the language / languages: English as an attachment in your email.

The manual is 3.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Virtuo 75

DRU Virtuo 75 Usermanual and installation guide - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info