694490

DRU Opera DVS 2-01 Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
USER MANUAL
Ignition
Ignition button A has three positions, i.e.:
O position button points to O
Pilot burner position button points to
Full position button points to
Turn the ignition button to the left from position O, press
down firmly as well and keep turning to the pilot burner
position
. By turning the button, the pilot burner is igni-
ted by means of an electrical spark. When the pilot burner
burns, keep pressing down the button for approx. 10 sec.
and then let go. The pilot burner is visible from the side,
behind the glass window. If the pilot burner does not igni-
te at once, the above-mentioned action can be repeated
immediately by turning the pressed down button back
towards O and then left again towards the pilot burner
position. After letting go of the ignition button, the pilot
burner should continue to burn. Then turn the ignition
button further towards the full position . Depending on
thermostat button B, the main burner will be ignited.
Controlling the temperature
The position of thermostat button B determines the
temperature in the room. Position 6 provides the highest
temperature, position 1 the lowest. The thermostat
controls the burner by modulating between “full position”
and “low position” of the burner. The thermostat will
automatically keep the room at the required set
temperature.
Switching off
Turn ignition button A back to the Pilot Burner position
(
symbol), only the pilot burner will continue to burn.
In order to switch off the appliance fully, you must press
down button A and turn it back to position O.
Important
An incorporated safety lock will be activated if the applian-
ce is set to the ,,OFF” (O) position. Therefore, wait
5 minutes before re-igniting the appliance. Do not try
to press down the ignition button during this time, as it is
locked by means of the safety lock. Do not force the
button, because the mechanism could get damaged.
Eco control pack
It is possible to order a separately available “Eco control
pack” with remote control. The “Eco control pack” is
needed to get the best out of your appliance.
This set has a receiver that must be placed in the tray
specifically intended for this purpose.
The tray is located under the gas control and can be rea-
ched by removing the cover.
Prevent cables from making contact with hot internal
components.
USER MANUAL
12
USER MANUAL
Ignition
Ignition button A has three positions, i.e.:
O position
button points to O
Pilot burner position button points to
Full position
button points to
Turn the ignition button to the left from position O,
press down firmly as well and keep turning to the
pilot burner position . By turning the button, the
pilot burner is ignited by means of an electrical
spark. When the pilot burner burns, keep pressing
down the button for approx. 10 sec. and then let
go. The pilot burner is visible from the side, behind
the glass window. If the pilot burner does not
ignite at once, the above-mentioned action can be
repeated immediately by turning the pressed down
button back towards O and then left again towards
the pilot burner position. After letting go of the
ignition button, the pilot burner should continue to
burn. Then turn the ignition button further
towards the full position . Depending on
thermostat button B, the main burner will be
ignited.
Controlling the temperature
The position of thermostat button B determines
the temperature in the room. Position 6 provides
the highest temperature, position 1 the lowest.
The thermostat controls the burner by modulating
between “full position” and “low position” of the
burner. The thermostat will automatically keep the
room at the required set temperature.
Switching off
Turn ignition button A back to the Pilot Burner
position ( symbol), only the pilot burner will
continue to burn. In order to switch off the
appliance fully, you must press down button A and
turn it back to position O.
Important
An incorporated safety lock will be activated if the
appliance is set to the ,,OFF” (O) position.
Therefore, wait 5 minutes before re-igniting the
appliance. Do not try to press down the ignition
button during this time, as it is locked by means of
the safety lock. Do not force the button, because
the mechanism could get damaged.
Eco control pack
It is possible to order a separately available “Eco
control pack” with remote control. The “Eco
control pack” is needed to get the best out of your
appliance.
This set has a receiver that must be placed in the
tray specifically intended for this purpose.
Art 2-01: The tray is located on the left side of the
gas control.
Art 3-01, 4-01, 5-01, 6-01, 8-02, 10-02: The tray is
located under the gas control.
Prevent cables from making contact with hot
internal components.
1
6
2
3
4
5
A
B
38P-0744/0
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Opera DVS 2-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Opera DVS 2-01 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info