528136
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
o p e r at i n g i n s t r u c t i o n s
English
13. Maintenance
At least once per year, the appliance should be checked for proper and safe
operation.
!Caution
- Your appliance should be maintained by a competent installer;
- In case of a broken or torn glass pane, do not use the appliance and close
the gas tap. Have the glass pane replaced immediately.
- Do not make any changes to the appliance yourself.
!Caution
As user, you are only allowed to clean the appliance on the outside:
- Do not use corrosive detergents;
- Paint damages, resulting from objects fallen/placed against the mantel of
the appliance are not covered by the warranty.
- Unpainted SS tubes can be cleaned with water, a soft cloth and possibly
a mild detergent. Aggressive detergents (e.g. chlorinated or abrasive) can
lead to rust stains or dull spots.
13.1 Cleaning the glass pane
Easy release® applies to more DRU models. The system allows you to open
the appliance, so that the glass pane can be easily cleaned on the inside.
There are several DRU Easy release® systems, check the installation manual
to see whether the appliance can be opened with an Easy release® system and
how the system is used correctly.
!Caution
The user is only permitted to clean the glass pane on the inside if the appliance
has been provided with an easy release® system. The appliance must be switched
o and at room temperature, before opening the glass pane.
During production, transport and installation it is possible that products end
up on the glass pane(s) that could burn into the glass. For that reason, it
is important that glass panes are cleaned correctly before the appliance is
ignited.
Before using the appliance for the rst time, clean the glass pane(s) on both sides
using the DRU spray (1) followed by the DRU glass pane cleaner (2). (see user in-
struction DRU spray (1) and DRU glass pane cleaner (2))
When igniting for the first time, combustion products are released from the
appliance that could cause a white deposit on the glass pane(s). Take the fol-
lowing steps to prevent this deposit from burning into the glass:
Clean the glass pane(s) once more, on both sides, using the DRU glass pane clea-
ner (2) (see user manual DRU glass pane cleaner (2))
EN
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Metro 100XT Tunnel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Metro 100XT Tunnel in the language / languages: English as an attachment in your email.

The manual is 4.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Metro 100XT Tunnel

DRU Metro 100XT Tunnel User Manual - German - 28 pages

DRU Metro 100XT Tunnel User Manual - Dutch - 28 pages

DRU Metro 100XT Tunnel Installation Guide - Dutch - 36 pages

DRU Metro 100XT Tunnel User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info