Manual DRU Maestro (page 28 of 40) (English, German, Dutch, French)

657633

Zoom out

Zoom in

1/40

CONVERSION INSTRUCTIONS

Adjusting the burner pressure

Reconnect the gas supply to the heater, if necessary, and

turn the new gas supply on.

Ignite the pilot light and turn the thermostat to the highest

setting.The gas control block has two points of pressure

measurement where the burner pressure and the pre-

pressure can easily be checked with a manometer.

Unscrew the screw (K) at the point of pressure

measurement and connect the manometers.

When converting to propane, adjust the burner pressure

with the pressure regulating screw (L), as shown in the

table. Check that the pre-pressure corresponds with the

pressure given in the table (pag.35).

If you had taken the burner unit out of the appliance, put it

back in place.

Make sure that the burner mounting plate slides into the

rail (M) of the combustion chamber.

Finally, affix a new type plate.

Reconnect the wiring, replace the vermiculite trays and fit

the glass pane and front.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DRU Maestro in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DRU Maestro Manual

Product: