Manuel d’installation207.2.4 Paroi arrière rejoignant le verre de la vitre latérale(voir fig. 7-8 et 7-9)Pour l'encastrement de la paroi jusqu'à la vitre latérale, procédez comme suit :1Mettez aux bonnes dimensions la paroi arrière à placer (voir fig. 7-8).1Desserrez de quelques tours les vis Parker de la moulure verticale et réglez les profils à la bonne distance. La distance dépend de l'épaisseur du mur. Pour les épaisseurs de matériau de 20 et 30 mm, des indicateurs sont appliqués. La plaque de protection n'est plus nécessaire et peut être enlevée. Resserrez les vis Parker (voir fig. 7-9).1Maintenez une distance de 5 mm entre la paroi et la vitre latérale.3-Dans le cas d'un appareil à 2 faces, l'encastrement sur le verre de la vitre latérale est possible uniquement sur l'arrière et pas sur le côté de la paroi latérale. Il doit être possible d'enlever la vitre avant. La moulure doit alors rester amovible.-Au niveau des matériaux jusque sur le verre, il est important de conserver une distance minimale par rapport au verre de 5 mm !-Au niveau des matériaux jusque sur le verre, il faut utiliser du matériau résistant à la chaleur qui résiste au minimum à une température de 85 °C.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 80-3 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 80-3 RCH in the language / languages: French as an attachment in your email.
The manual is 7.2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
