657631
4
Zoom out
Zoom in
Previous page
1/68
Next page
1. Step-by-step installation planThe major steps of the installation are described below,Perform these steps and tick them once they have been performed correctly.3Carefully read the installation manual before installing the appliance.Installation manual4The appliance is now (after the above-mentioned steps) ready for use and the consumer is familiar with the possibilities for using the appliance.Check that the gas type and gas pressure is correct on the location where the appliance is placed.Check that the supplied parts are present (see table 6-1).Check the appliance for damages.Make sure that the total installation complies with the applicable national, local and architectural regulations.Make sure that there is a gas tap present that is always accessible and meets the legal regulations.Ensure that the placement meets the applicable requirements concerning fire safety.Make sure that the configuration of the concentric system with roof or wall duct corresponds with the imposed requirements (see section 7.3).Make sure the chimney breast meets the fire safety requirements. (see section 7.4).Make sure the chimney breast meets the minimum dimensions (see section 7.4).Make sure the chimney breast is sufficiently ventilated (see section 7.4).Make sure that the control hatch with gas control is placed correctly (see section 7.5).Make sure that the restrictor slide and air inlet guides are correctly adjusted (see section 8.2).Ensure a correctly placed wood, pebble set or broken glass set with accessories (see section 8.3).Make sure the remote control is made ready for use (see section 9.4).Check all gas connections for gas tightness (see section 10.1).Make sure that the appliance is first ignited without the glass pane (see section 10.3.1).Ensure a cleaned glass pane in accordance with the instruction, before the atmospheric fire is ignited with the glass pane for the first time (see chapter 12).Check the appliance with installed glass pane for a correct ignition and a correct flame transfer of the main burner(s) when igniting for the first time (see section 10/3/2).Familiarise the user with the appliance (see chapter 11).Check that the correct type of appliance has been delivered (see table 4-1).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Maestro 80-2 RCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Maestro 80-2 RCH in the language / languages: English as an attachment in your email.

The manual is 7.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Maestro 80-2 RCH

DRU Maestro 80-2 RCH Installation Guide - German - 68 pages

DRU Maestro 80-2 RCH User Manual - Dutch - 28 pages

DRU Maestro 80-2 RCH Installation Guide - Dutch - 44 pages

DRU Maestro 80-2 RCH Installation Guide - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info