810253
31
Zoom out
Zoom in
Previous page
1/56
Next page
Installation manual
31
8.2 Setting the appliance
The appliance has to be set in such a way that it works correctly in combination with the concentric system. For that
purpose, a restrictor slide is possibly adjusted or removed and an air inlet guide is placed. The conditions for application
with wall terminal and roof terminal are stated in tables 7-3 to 7-5.
This appliance is suitable for PowerVent®. For more information, please consult the PowerVent® installation manual.
8.2.1 Restrictor slide
The restrictor slide is mounted ex-factory. Adjust it, if necessary, or remove the restrictor slide (see appendix 3, fig. 9).
Follow the steps below for adjusting the restrictor slide:
1Unscrew the self-tapping screws of the plate in the top of the appliance.
1Remove this plate.
1Loosen the 2 self-tapping screws by a few turns.
1Adjust the position of the restrictor slide using table 7-4. The letter of the position on the restrictor slide corresponds with
the letter of the situation.
1Make sure that the point of the triangle belonging to the correct position and the centre of the self-tapping screw are
exactly aligned.
1Tighten the 2 self-tapping screws .
1Place back the plate and fasten it with the self-tapping screws.
Follow the steps below for removing the restrictor slide:
1Unscrew the self-tapping screws of the plate in the top of the appliance.
1Remove this plate.
1Unscrew the 2 self-tapping screws from the appliance.
1Remove the restrictor slide.
1Screw the 2 self-tapping screws back in the appliance.
3- The self-tapping screws of the restrictor slide must have been screwed back in the appliance.
- Keep the restrictor slide, you may need it in future
1Place back the plate and fasten it with the self-tapping screws
1
2
3
4
38C-2697
8-5
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Maestro 75 Tunnel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Maestro 75 Tunnel in the language / languages: English as an attachment in your email.

The manual is 14.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Maestro 75 Tunnel

DRU Maestro 75 Tunnel User Manual - German - 56 pages

DRU Maestro 75 Tunnel User Manual - Dutch - 56 pages

DRU Maestro 75 Tunnel User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info