Installation manual50Appendix 1: MalfunctionsMalfunctionsError codeF01F02F03F05F0654F08 ProblemCommunication loss between receiver and ESYSReceiver overheated (60° above room temperature)Internal (receiver) NTC sensor does not work correctlyInternal safety errorCommunication loss between transmitter and receiverSafety error transmitterNo ionizationPossible causeCommunication cable does not make contactCommunication cable defectivePoor ventilation at receiverReceiver makes contact with hot partsReceiver defectiveReceiver defectiveTransmitter is out of the receiver's rangeObstacles between transmitter and receiver that could interfere with the signalTransmission strength is too weakCommunication loss too long (F06)No sparksNo gasPoor flame transfer main burnerNo good flame under ionization pin (suffocating flame)Ionization pin placed incorrectlyIonization pin blocked (measure ionization current when > 0 and < 1.8 uA)Ionization pin defective (measure ionization current when 0)RemedyMake sure the connectors of the communication cable make proper contactReplace communication cableImprove ventilation at receiverMove receiver in such a way that there is no more contact with hot partsReplace the receiverReplace the receiverMake sure the transmitter is near the receiverRemove possible obstacles between transmitter and receiverCheck transmission strength (see User Manual chapter 10)Register transmitter againMake sure the distance between the electrodes is 3-4 mmReplace the spark electrodesCheck whether there is gasWhen using PowerVent®, check that the gas valve opensCheck position of blocks/chipsIf necessary, remove dust from burner openingsGlass pane strips not placed correctlyCheck restriction and air inlet guide settingWhen using PowerVent®, check pressure settingPlace it on the right location.Remove any vermiculite or chips from the burnerReplace the ionization pin
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 60 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 60 RCH in the language / languages: English as an attachment in your email.
The manual is 4.91 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
