Installation manual243When placing the chimney breast, you should take the following into account:-The minimum dimensions of the chimney breast surround (see fig. 7-13).-The location of the control hatch: this must be placed as low as possible.-The distance of the control hatch up to the side of the appliance (see fig. 7-14).-The dimensions of the control hatch (see section 7.5).-The location of the ventilation holes (V-out).-A minimum 30 cm distance between the top of the ventilation hole (outgoing) and the ceiling of the house.-The dimensions of the glass pane, so that it can be placed/removed after placing the chimney breast.-The protection of the gas control and the pipes against cement and plaster.-Placement of decorative strips, frames and such like; if possible, install these after the carrying out any structural work. If this is not possible, protect them during this work. Avoid the use of painter's tape. If this is not possible: use good quality painter's tape and remove this tape immediately after plastering or painting work (prolonged application of painter's tape may cause damage).3You should preferably apply the ventilation holes (outgoing) on both sides of the chimney breast. Use the DRU ventilation elements.Check the following items, before the chimney breast is fully closed:-Is the discharge / concentric system placed correctly?-Have the channels, fastening brackets and possible clip bindings, that become inaccessible later, been secured with self-tapping screws?-Has no plastering work been performed on or across the edges of the construction frame? This due to the fact that:- the heat of the appliance could cause cracks;- It will no longer be possible to remove/place the glass pane.-When using stone-like materials and or plaster finishing, allow the chimney breast to dry for at least six weeks prior to taking the appliance into operation in order to prevent cracks.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 60 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 60 RCH in the language / languages: English as an attachment in your email.
The manual is 4.91 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
