Installation manual117. Installation7.1 Placing the applianceSeparate sub-sections describe different ways of placing the appliance. The general description below for placing the appliance applies to all these sub-sections:1Place the appliance where it will be installed and observe the following:3-The construction dimensions of the appliance (see fig. 7-1 / 7-2).-The minimum chimney breast dimensions (see section 7-4).-The length of the cables and pipes (see section 7-4).-Place the appliance in front of a heat-resistant and non combustible wall%MCEPASTEBIN%and on a heat-resistant and non-flammable floor. The wall brackets on a built-in appliance ensure that the minimum distance to the wall is maintained (see fig. 7-1 (A) / 7-2 (A)).-Take sufficient measures to prevent temperatures of a possible wall behind the chimney breast becoming too high, including the materials and/or objects behind the wall.-Make sure there are no combustible objects or materials within the radiation range (see table 4-1 and fig. 7-12) of the fire.-Place the concentric system in such a way that no fire hazard can ever be created (see section 7.12).-Do not cover the appliance and/or do not wrap it in an insulation blanket or any other material.-Make sure that the appliance to be installed has a stable position. Fasten possible extending legs with the self-tapping screws.1Set the height of the appliance using the adjustable feet and level the appliance.1Attach the appliance to the wall using wall brackets (see fig. 7-1 (A) / 7-2 (A)).1Loosen the bracket with the gas control by loosening the self-tapping screws and screw the self-tapping screws back in the appliance.1Place the bracket with the gas control, together with the wiring of the ignition/ionization cable(s), the flexible gas hose(s) and the data plate with chain in the direction of the control hatch (see section 7.5).3-Do not lay the cables of the ionisation and ignition pins along metal parts, wiring and other components.-The data plate must remain attached to the appliance with the chain.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 60 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 60 RCH in the language / languages: English as an attachment in your email.
The manual is 4.91 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
