5. SAFETY5.1 General3-Observe the generally applicable regulations and precautions/safety instructions in this manual.-First check that the technical execution of the appliance to be installed is correct (see table 4-1).-Read this manual carefully to ensure the proper and safe installation of the appliance.-Observe the regulations/instructions in this manual.5.2 RegulationsPlease install the appliance in accordance with the applicable national, local and constructional (installation) regulations.5.3 Safety instructionsCarefully observe the following precautions/safety instructions:3The appliance may only be installed and maintained by recognised installers who are skilled in the field of gas heating and electricity.3Do not make any changes to the appliance.3When installing a built-in appliance:-Use non-combustible and heat-resistant materials for the chimney breast, including the top of the chimney breast and the material in the chimney breast, such as the floor under the appliance and the back wall against which the appliance will be placed. For this you can use both sheet material and stone-like materials.-Take sufficient measures to prevent temperatures of a wall behind the chimney breast becoming too high, including the materials and/or objects behind the wall.-Take the minimum required internal dimensions of the chimney breast into account. These are for the benefit of safety and for the prevention of excess heat accumulation in the chimney breast.-Vent the chimney breast by means of the ventilation holes (see table 4-1). These are essential for ensuring safety and for the prevention of excess heat accumulation in the chimney breast.-Use heat resistant electrical connectors.-Place heat-resistant electrical wiring away from the appliance and as low as possible in the chimney breast. This has to do with the temperature development in the chimney breast.-Only use the flue gas discharge / combustion air supply system (concentric system) supplied by DRU.3When installing a free-standing appliance: place the appliance at the indicated minimum distance from the back wall, as indicated further down in the text.3Do not cover the appliance and/or do not wrap it in an insulation blanket or any other material.3Keep combustible objects and/or materials outside the appliance's radiation range (see table 4-1).3Only use the accompanying set, such as the wood or pebble set, and place it exactly as described.3Leave space around the ionisation pin and spark electrode and never place glow material around these pins.3Make sure there is no dirt in gas pipes and connections.3Place a gas tap in accordance with applicable regulations.3Check the complete installation for gas tightness prior to commissioning.3Prevent the explosion hatch(es) on the top of the appliance (if present) from getting clogged and check that they properly fit on the sealing surface, before the appliance is built in.3Do not ignite the appliance until it is fully installed when it comes to the gas connections, discharge system and electrical components.3Do not use the appliance when a pane is broken and/or cracked, until it has been replaced.3The appliance was designed for atmospheric and heating purposes. This means that all visible surfaces, including the glass pane, can become hotter than 100C°. It is recommended to always place a protective grating in front of the appliance when there are children, elderly people or handicapped persons in the same room as the appliance.If it is possible that vulnerable people are regularly present in the room with no supervision, a fixed guard should be mounted around the appliance.Installation manual7
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 60 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 60 RCH in the language / languages: English as an attachment in your email.
The manual is 4.91 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
