528138
13
Zoom out
Zoom in
Previous page
1/20
Next page
13
u s e r m a n u a l
English
4.2.5.2 Activating the thermostat function
For activating the thermostat function, you must proceed with the following
steps:
Place the appliance in the standby (pilot burner) position using button
(small ame).
Set the day/night temperature.
Choose the Y TEMP or TEMP function using the SET button.
4.2.6 Timer for thermostat function
Using the timer enables you to set two times per 24 hours for switching on
the day temperature and two times per 24 hours for switching on the night
temperature.
In order to control the night temperature, it should be set to at least 5 °C /
40 °F.
If the night temperature is set to the “-- position, the appliance will remain in
the standby position. The appliance will only switch on at the next switch-on
time of the day temperature.
The appliance must be in standby position in order to be controlled by the
timer.
Example of switch times
You have set a day temperature and night temperature of, for example, 20 °C
and 15 °C.
P1 Y TIMER = 7 hours; the temperature will go to 20 °C at 7 am.
P1 TIMER = 9 hours; the temperature will go to 15 °C at 9 am.
P2 Y TIMER = 17 hours; the temperature will go to 20 °C at 5 pm.
P2 TIMER = 22 hours; the temperature returns to 15 °C at 10 pm.
4.2.6.1 Setting times for the timer
To set the timer, proceed as follows:
Set the day and night temperature as described above at section 4.2.5.1.
Briey press the SET button to enter the (P*) TIMER position.
Press the SET button until P1 Y TIMER is displayed and the time ashes.
Set the rst switch on time of the day temperature using the buttons (large
ame) and (small ame).
Briey press the SET button to set the next time of the cycle, P1 TIMER.
Successively set the times P2 Y TIMER and P2 TIMER.
Press the OFF button or wait until position (P*) TIMER appears on the display.
4.2.6.2 Activating the timer function
Follow the steps below for activating the timer control:
Place the appliance in the standby (pilot burner) position using button
(small ame).
EN
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU GLOBAL 70 XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU GLOBAL 70 XT in the language / languages: English as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU GLOBAL 70 XT

DRU GLOBAL 70 XT User Manual - English - 60 pages

DRU GLOBAL 70 XT User Manual - German - 20 pages

DRU GLOBAL 70 XT User Manual - Dutch - 20 pages

DRU GLOBAL 70 XT User Manual - Dutch - 60 pages

DRU GLOBAL 70 XT User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info