528138
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
u s e r m a n u a l
English
4.2.2.2 Flame height / standby
By means of the button (large flame), the appliance always switches to full
position. Also when igniting the appliance, the full position is automatically
activated. The flame height is therefore always controlled by means of the
button (small flame). By continuing to lower the flame height, the appliance
can be set to the standby position; this means that only the pilot burner will
still be burning.
Press the button (large ame) to activate the full position and/or switch on
the main burner from standby position (pilot ame).
Press the button (small ame) to lower the ame height and/or set the ap-
pliance to the standby position.
By pressing the button (small ame) twice in quick succession, the appli-
ance automatically switches to full position and then to the smallest set ame
picture (small position).
Caution
- If you continue to press down button (large ame) on the remote control,
the main burner should be largely ignited within about 10 seconds. If this is
not the case, you must close the gas tap and warn your installer;
- If the appliance ignites with a pop sound, you must close the gas tap and
contact your installer.
4.2.2.3 Switching off
Switch the appliance off by pressing the OFF button. The pilot burner will
also go out.
!Tip
During cold periods, it makes sense to leave the pilot ame on. This will incre-
ase the temperature in the appliance and the discharge system, thus reducing
the probability of condensation when starting up. In addition, leaving the pilot
ame on has a positive eect on the life span of various components in the
appliance (such as the battery) and improves the ignition of the burner. After 5
days of no activity, the pilot burner switches o automatically.
4.2.3 Temperature display
The room temperature can be indicated on the display in degrees Celsius (°C)
using a 24 hour clock or degrees Fahrenheit (°F) using a 12 hour clock.
Simultaneously press OFF and (small ame), until the correct display appears.
4.2.4 Time
The display can indicate time.
After placing the battery or simultaneously pressing (large flame) and
(small flame), the time indication will flash on the display and you will be able
to adjust the time.
EN
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU GLOBAL 70 XT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU GLOBAL 70 XT in the language / languages: English as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU GLOBAL 70 XT

DRU GLOBAL 70 XT User Manual - English - 60 pages

DRU GLOBAL 70 XT User Manual - German - 20 pages

DRU GLOBAL 70 XT User Manual - Dutch - 20 pages

DRU GLOBAL 70 XT User Manual - Dutch - 60 pages

DRU GLOBAL 70 XT User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info