810279
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
u s e r m a n u a l
English
4.2.1 Setting the communication
code
Prior to putting the application into
operation, a communication code
must be set between the remote con-
trol and the receiver. The code is cho-
sen randomly from the 65000 availa-
ble codes. As a result, the chance that
other remote controls near you are using the same code and affect the operation of
your appliance is very small.
Follow the procedure described below:
Hold down the reset button on the receiver, until you hear two consecutive
sound signals (see g. 3).
After the second, longer signal, let go of the reset button.
Within 20 seconds, press the (small ame) button on the remote control, until you
hear two short sound signals: this is the conrmation of a good communication.
!Caution
When installing a new remote control or receiver, you must set a new commu-
nication code.
4.2.2 MAN position
By briefly pressing the SET button, you will go through the following functions:
MAN Y TEMP TEMP (P*)TIMER MAN
where, depending on the timer setting:
(P*) is displayed as P1 Y, P1 , P2 Y, P2 .
!Tip
You can also go back to the MAN position by pressing the button (large
ame) or (small ame).
!Caution
- When pressing the buttons (with the exception of the SET button), the trans-
mission symbol ( ) will appear to indicate that transmission is taking place
between the remote control and the receiver;
- The receiver acknowledges the transmission with a sound signal;
- The appliance will automatically enter the standby position, if there is no
transmission for 6 hours.
Set the remote control to the MAN position.
3
EN
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Global 120 BF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Global 120 BF in the language / languages: English as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Global 120 BF

DRU Global 120 BF User Manual - German - 20 pages

DRU Global 120 BF User Manual - Dutch - 20 pages

DRU Global 120 BF User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info