810232

DRU Convexo Manual

34
Zoom out
Zoom in
Previous page
1/36
Next page
User manual
For appliances with a DRU Bluetooth remote control
958.020.00EN
English
Store this document in a safe place
User manual
User manualUser manual
2
A - Display
B - Ignition
C - Down
D - Up
E - Eco Wave
F - Manual operation
G - Switching power supply
H - Ignition / Switch o
I - Second burner
J - Function button
K - Thermostat
L - Eco Glow
B
A
C
D
E
F
G
H
I
J
K
L
38C-2781
User manual
3
Button Display Description
Switching off the appliance
Page 19, section 4.3.5
+
Igniting the appliance
Page 19, section 4.3.6
Second burner on/off
Page 20, section 4.3.7
Switching on the Eco Wave
Page 22, section 4.3.9
Switching on manual operation
Page 21, section 4.3.8
Switching on the thermostat
Page 23, section 4.3.10
Eco Glow / Switch Contact on/off
Page 24, section 4.3.11
Switching power supply on/off
Page 24, section 4.3.12
Action in progress
Action is carried out
Bluetooth connection status
Page 14, section 4.3
Error message
Page 28, section 5
+
Time schedule on/off
Page 25, section 4.3.13
Replacing the batteries
Page 14, section 4.3.1
Temperature display
The currently measured room temperature
Connection lost
Page 28, section 5.1
Error code
Page 30, section 5.3
+
Resetting the appliance
Page 30, section 5.4
(5 sec.) Bluetooth pairing mode
Page 18, section 4.3.4
User manualUser manual
4
Contents
1. Introduction 5
2. Safety 6
2.1 Precautions / safety instructions 6
2.1.1 Safety of the installation 6
2.1.2 Safety of people and animals 8
2.1.3 Safety through maintenance 9
2.2 EU Declaration of Conformity 9
3. Taking the appliance in operation 10
3.1 Stoking up for the rst time 10
3.2 Discolouration of walls and ceilings 11
4. Operating the appliance 12
4.1 DRU Fire App 12
4.2 Home automation 13
4.3 Remote control 14
4.3.1 Placing/replacing the batteries 14
4.3.2 Coupling the remote control 16
4.3.3 Uncoupling the remote control 18
4.3.4 Coupling the DRU Fire App 18
4.3.5 Switching o the appliance 19
4.3.6 Ignition 19
4.3.7 Switching on/o the second burner 20
4.3.8 Manual operation 21
4.3.9 Eco Wave 22
4.3.10 Thermostat 23
4.3.11 Eco Glow / Switch contact 24
4.3.12 Switching power supply 24
4.3.13 Time Schedule 25
4.3.14 Temperature display in degrees Celsius or Fahrenheit 26
4.3.15 Updating the remote control 27
5. Malfunction 28
5.1 Error message 28
5.2 Measuring the strength of the signal 29
5.3 Error code F/E 30
5.4 Resetting the appliance 30
6. Maintenance 31
6.1 Cleaning the glass pane(s) 32
6.1.1 Easy release door system 33
6.2 How to use DRU spray 34
6.3 How to use DRU glass pane cleaner 34
7. Environment 35
7.1 General 35
7.2 Appliance 35
8. Warranty 35
9. Technical data Remote control 35
User manual
5
1. Introduction
DRU, a manufacturer of gas-fired and electric stoves, develops and
produces products that comply with the highest quality, performance
and safety requirements. This appliance has a CE label, which means that
it complies with the essential requirements of the European gas appliance
directive. The appliance is supplied with an installation manual and a user
manual. Installation and maintenance of the appliance must be carried
out by a professional and certified expert with proven knowledge and
competence, hereafter referred to as competent installer.
This user manual contains all information required to operate the
appliance in a correct and safe manner. Carefully read this manual before
taking the appliance in operation. Users are only permitted to perform
the work described in the user manual. For other activities you must
involve a competent installer. In case of questions or doubts, please
contact your dealer.
The following symbols are used in the manual to indicate important
information:
1 Work to be performed.
2 Tips and additional information.
3 Necessary instructions to prevent problems that might occur during
installation and/or use.
3 Necessary instructions to prevent fire, personal injury or other
serious damages.
User manualUser manual
6
2. Safety
2.1 Precautions / safety instructions
1 Carefully read this section about safety and accurately
observe the measures and instructions in this manual.
2 The control unit of the appliance performs a safety
check on the system every 24 hours. It is possible
that this check is performed while the appliance is in
operation. In that case, the appliance will extinguish
and ignite again. Repetition at this particular time can
be prevented by removing the plug from the socket and
inserting it again at a time when the appliance is rarely
or never burning.
2.1.1 Safety of the installation
3 The appliance is powered by 230VAC 50Hz.
3 Do not make any changes to the appliance.
3 If the appliance ignites with a thud, close the gas tap
and contact your dealer.
3 In case of malfunctions and/or poor performance,
close the gas tap and contact your dealer.
3 If the appliance does not ignite after three failed
attempts, it is disabled for 30 minutes (hard lockout)
to avoid dangerous accumulation of gas. Contact
your dealer.
User manual
7
3 Never use the appliance in case of a broken or cracked
glass pane. Close the gas tap and have the glass pane
replaced.
3 Make sure that combustible objects and/or materials
such as curtains have a distance from the appliance
and/or the flues of at least 80cm, unless indicated
otherwise in the installation manual.
3 Do not dry clothes, towels, etc. on and/or near the
appliance, in order to prevent fire.
3 Avoid contact with hot parts of the appliance to
prevent burns.
3 Make sure the control hatch is closed, in connection
with the electrical voltage that is present.
2 If the appliance will not be used for an extended period
of time, we recommend removing the batteries from the
remote control in order to avoid damage resulting from
leaking batteries.
User manualUser manual
8
2.1.2 Safety of people and animals
3 Do not leave children and persons who cannot
judge the consequences of their actions alone with
a burning appliance.
3 Place the remote control out of reach from children and
persons who cannot properly judge the consequences
of their actions.
3 Pets and birds in particular can be sensitive to the
vapours that are released when heating for the first
time. Keep the room well ventilated.
3 Only if supervised by an experienced person, or if
instructions have been provided about how to operate
the appliance and the accompanying safety risks, is it
permitted to have the appliance operated by children
from 8 years of age, persons with reduced physical,
sensory or mental capacities and persons with lack of
experience and knowledge.
3 Children should not play with the appliance.
3 Cleaning and user maintenance should not be
performed by children without supervision.
3 The appliance may only be operated by means of the
remote control and/or the DRU Fire App, provided the
appliance is supervised.
3 In case of operation by means of the thermostat
function, DRU Fire App or home automation system,
the appliance may ignite without a direct ignition
command. Take measures to prevent damage and
unsafe situations in such cases.
3 If the DRU Fire App is used, measures should be taken
to avoid hacking and thus unintended ignition of the
appliance.
User manual
9
3 The appliance was designed for atmospheric and
heating purposes. This means that all visible surfaces,
including the glass pane, can become hotter than 100°C.
It is recommended to always place a guard grille in front
of the appliance when children, older people or persons
with reduced physical, sensory or mental capacities are
in the same room as the appliance. If these vulnerable
people are regularly present in the room without
supervision, a fixed guard should be made around
the appliance.
2.1.3 Safety through maintenance
3 The appliance should be installed by a competent
installer.
3 Your appliance should be maintained at least once
per year by a competent installer.
3 Allow the glass pane(s) to cool down to room
temperature prior to cleaning.
3 Contact your dealer for the safe and correct removal
of the appliance.
2.2 EU Declaration of Conformity
We, DRU Verwarming B.V., hereby declare that the type
of radio equipment ‘Remote Control DRU RC BLE’ is
in accordance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity
is available at the following internet address:
druservice.com
User manualUser manual
10
3. Taking the appliance in operation
Noises that occur while heating, cooling, adjusting the setting and
burning the gas are part of the normal function of the appliance.
2 When starting the appliance, it is possible that condensation occurs
on the inside of the glass pane(s). Once the appliance has reached its
temperature, the condensation will disappear automatically.
3.1 Stoking up for the rst time
3 - If the chimney breast is made of stone-like materials or has been
finished in plaster, it should be left to dry for at least 6 weeks prior
to taking it into operation.
- Prior to stoking up for the first time, clean the glass pane(s)
(see section 6.1).
- Prior to taking into operation, the remote control should be coupled
to the appliance (see section 4.3.2).
3 When the appliance is stoked up for the first time, the flame picture can
be affected and an unpleasant smell may occur as volatile components
evaporate. This process may take a number of hours.
- Keep the room well ventilated.
- Make sure there are no pets in the room.
2 Set the appliance to its highest level to speed up the evaporation process
3 Before and after stoking up for the first time, clean the glass panes
according to the instruction to prevent contaminations from getting
burned into the glass permanently (see section 6.1).
User manual
11
3.2 Discolouration of walls and ceilings
Discolouration of walls and ceilings can occur, for instance due to the
combustion of dust as a result of too little ventilation, tar substances
from tobacco smoke and soot formation as a result of burning
atmospheric candles. The problems can be (partly) prevented by
properly ventilating the room in which the appliance is located.
User manualUser manual
12
4. Operating the appliance
Several methods can be used to operate the appliance. These are
described in the sections below.
4.1 DRU Fire App
The free DRU Fire App allows you to operate the appliance via the App.
By means of the Eco Wave function, you are able to set two standard flame
patterns and one individual flame pattern. This allows adjustment of the
flame picture according to your own wishes and you can also determine
the amount of gas you want to save yourself. If the stove malfunctions, the
app will indicate the problem. The section ‘Tips and tricks’ provides useful
information about the stove.
The DRU Fire App is available for both iOS and Android devices.
2 See section 4.3.2.3 for coupling the DRU Fire App to the appliance
User manual
13
4.2 Home automation
It is possible to control the appliance by means of a home automation
system. Consult your dealer for the possibilities.
2 When the appliance is controlled by means of a home automation system,
the operation can be taken over by the remote control and/or DRU Fire
App at any time. After taking over from the remote control and/or App,
the home automation system should be reset to the zero position to allow
operation of the appliance with this system again.
User manualUser manual
20
4.3.7 Switching on/o the second burner
If the appliance has a second burner, it can be switched on and off with
the remote control.
1 The second burner can be switched on and off by pressing the button.
When switching on, the symbol is shown on the display (see fig. 4-7).
By pressing the button once more, the second burner is switched off.
The symbol disappears from the display.
2 - A click sound can be heard before the second burner is ignited.
- When switching on the second burner, the appliance first switches to
the full position to ensure correct ignition, after which it returns to the
previously set position.
User manual
21
4.3.8 Manual operation
By means of manual operation it is possible to adjust the flame height
manually in 10 steps from 1 (minimum) to 100 (maximum). To adjust the
flame height, proceed as follows:
1 Press the button to activate manual operation. The symbol is
shown on the display (see fig. 4-7).
1 Use buttons and to adjust the required flame height. For a few
seconds, the adjusted flame height remains visible on the display
(see fig. 4-8), after which the remote control returns to the main
screen (see fig. 4-7).
2 When the second burner (if applicable) is switched off, 100 (maximum)
is identical to the maximum capacity of the main burner.
1 The flame height can be adjusted at any time by repeating the steps
described above.
3 If a time schedule is active and the appliance is switched on manually,
the appliance will change its settings according to the time schedule in
the event of a scheduled switch in the time schedule.
User manualUser manual
22
4.3.9 Eco Wave
Eco Wave allows you to vary the height of the flame picture automatically
and continuously. Eco Wave saves energy and provides a dynamic flame
picture.
1 Switch on the Eco Wave mode by pressing the button (see fig. 4-9).
2 - In the DRU Fire App, it is possible to make a selection from various
pre-programmed flame patterns. It is also possible to configure your
own flame patterns according to your own preferences (see section 4.1).
- If the DRU Fire App is not being used, the standard loaded Eco Wave
programme will be used.
- When Eco Wave is switched on, the flame height cannot be adjusted
manually.
- When the second burner (if applicable) is switched off, the Eco Wave
programme is only performed with the main burner.
3 If a time schedule is active and the appliance is switched on manually, the
appliance will change its settings according to the time schedule in the
event of a scheduled switch in the time schedule.
User manual
23
4.3.10 Thermostat
By means of the thermostat function, the flame height is adjusted
automatically based on the required room temperature.
1 Switch on the thermostat by pressing the button (see fig. 4-10).
1 Use buttons and to select the required temperature.
2 The temperature can be set between 5.0 and 35.0 °C.
1 For a few seconds, the programmed temperature remains visible on
the display (see fig. 4-11).
1 The remote control then returns to the main screen. The current room
temperature is shown (see fig. 4-10).
3 Make sure the remote control is in the same room as the appliance.
2 - The remote control contains a temperature sensor. Therefore, always
place it on a fixed, draught-free location with no direct sunlight.
- When the second burner (if applicable) is switched off, only the main
burner is being controlled.
- When the set temperature has been reached, the appliance switches off.
3 If a time schedule is active and the appliance is switched on manually,
the appliance will change its settings according to the time schedule in
the event of a scheduled switch in the time schedule.
User manualUser manual
34
6.2 How to use DRU spray
1 Apply the DRU spray directly on the glass pane.
1 Wipe the glass pane fully clean and dry with a clean microfibre cloth.
6.3 How to use DRU glass pane cleaner
3 Properly shake the glass pane cleaner prior to use.
1 Apply a limited amount of DRU glass pane cleaner to a slightly damp
microfibre cloth.
1 Rub DRU glass pane cleaner over the whole glass pane(s).
1 After waiting for a few minutes, wipe the glass pane fully dry with a clean
and dry microfibre cloth.
1 Repeat the above-mentioned steps in case of stubborn deposits.
If necessary, you can exert more pressure to remove the contamination.
… 34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Convexo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Convexo in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Convexo

DRU Convexo User Manual - German - 36 pages

DRU Convexo User Manual - Dutch - 36 pages

DRU Convexo User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info