810304
20
Zoom out
Zoom in
Previous page
1/28
Next page
INSTRUCTIONS FOR INSTALLATION
18
Foreword
Dear Customer,
We would like to thank you for buying this DRU product.
Our products have been designed and produced to meet
the highest possible quality, performance and safety
requirements, allowing you to enjoy years of problem-free
use.
In this booklet you will find instructions for the installation
and use of your new appliance. Please read these
instructions and the manual carefully to familiarize yourself
with the appliance. If you require any further support,
please do not hesitate to contact your supplier.
Unpacking
Once the heater has been unpacked, all packaging should
be disposed of in the regular manner.
Connection
This appliance should be connected by a registered
installer.
INSTRUCTIONS FOR INSTALLATION
Gas type
This appliance can only be used and is only suitable for
the country and the type of gas mentioned on the type
identification tag. Check that the local gas type and
pressure correspond with the specifications on the gas
type plate. Check that the gas pre-pressure and burner
pressure correspond with what is stated on the type
plate. If necessary, use the control screw to correct the
burner pressure. The control screw for burner pressure is
located behind the cover on the gas control.
This cover can be removed by removing the screw
and clicking loose the lip on the left side by means of a
screwdriver. The type plate is on the inside of the casing.
All regulations applicable for gas installation, including
any locally enforced regulations, should be observed at
all times. The appliance must be connected by a qualified
installer.
Reconstruction to different type of gas
If you want to convert this appliance into a different
type of gas, please contact DRU’s service department
and ask what is possible. Reconstructions should only be
performed by authorized gas installers.
Important
Make sure that any curtains or other combustible
materials are at least 50 cm away from the heater.
Beware! Touching hot parts of the heater can cause burns
and blisters!
The appliance must be installed by a qualified fitter.
DO NOT use a dust filter under or on top of the casing.
DO NOT hang wet clothes or towels etc. on the heater
to dry!
The appliance was designed for atmospheric and heating
purposes. This means that all visible surfaces, including
the glass pane, can become hotter than 100C°. It is
recommended to always place a protective grating in
front of the appliance when there are children, elderly
people or handicapped persons in the same room as
the appliance. If it is possible that vulnerable people are
regularly present in the room with no supervision, a fixed
guard should be mounted around the appliance.
Installation and maintenance of the appliance should be
performed by a professional certified expert with proven
knowledge and demonstrable competence in this field. A
professional expert takes all technical aspects such as heat
output and gas connection into account, as well as the flue
gas discharge requirements. The installation manual will
sawing line
sawing line
Y +10 mm
X + 20 mm
38C-1033
the height of the pipe mouth
YX
Outlet
Important
Top
fig. 3
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU BASSO-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU BASSO-01 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info