810301
15
Zoom out
Zoom in
Previous page
1/56
Next page
ART
USER MANUAL
Ignition
Ignition button A has three positions, i.e.:
O position button points to O
Pilot burner position button points to
Full position button points to
Turn the ignition button to the left from position O, press
down firmly as well and keep turning to the pilot burner
position . By turning the button, the pilot burner is igni-
ted by means of an electrical spark. When the pilot burner
burns, keep pressing down the button for approx. 10 sec.
and then let go. The pilot burner is visible from the side,
behind the glass window. If the pilot burner does not
ignite at once, the above-mentioned action can be repea-
ted immediately by turning the pressed down button back
towards O and then left again towards the pilot burner
position. After letting go of the ignition button, the pilot
burner should continue to burn. Then turn the ignition
button further towards the full position . Depending on
thermostat button B, the main burner will be ignited.
Controlling the temperature
The position of thermostat button B determines the
temperature in the room. Position 6 provides the highest
temperature, position 1 the lowest. The thermostat
controls the burner by modulating between “full position”
and “low position” of the burner. The thermostat will
automatically keep the room at the required set
temperature.
Switching off
Turn ignition button A back to the Pilot Burner position
(symbol), only the pilot burner will continue to burn.
In order to switch off the appliance fully, you must press
down button A and turn it back to position O.
Important
An incorporated safety lock will be activated if the appli-
ance is set to the ,,OFF” (O) position. Therefore, wait
5 minutes before re-igniting the appliance. Do not try
to press down the ignition button during this time, as it is
locked by means of the safety lock. Do not force the
button, because the mechanism could get damaged.
Eco control pack
It is possible to order a separately available “Eco control
pack” with remote control. The “Eco control pack” is
needed to get the best out of your appliance.
This set has a receiver that must be placed in the tray
specifically intended for this purpose.
Art 2-01: The tray is located on the left side of the gas
control.
Art 3-01, 4-01, 5-01, 6-01, 8-02, 10-02: The tray is located
under the gas control.
Prevent cables from making contact with hot internal
components.
English
USER MANUAL
13
1
6
2
3
4
5
38P-0744/1
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU ART 6-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU ART 6-01 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info