695371
32
Zoom out
Zoom in
Previous page
1/48
Next page
DRU 44MF 32 03.27647.000
Always keep the stove doors tightly closed.
Never let the doors open when the fire is
burning.
Add extra fuel when necessary. Never add
too much fuel. It is best to fill the stove for
one third and to top it up on a
regular basis.
Always open the filling door slowly and for a
short space of time. Before filling up, the charcoal bed should be carefully spread open.
Check whether the coals are glowing enough just behind the log retainer, so that the
added fuel will immediately catch fire. If necessary you can open the lower air slide for a
while.
Open stacking will make the logs burn very intensely, as the oxygen can easily reach
every part of the fire. This method of stacking is applied when burning wood for a short
while. Compact stacking will make the fire burn slower, as the air can only reach the
outer parts of the fire. This stacking method is best used when burning for a longer
while.
Low intensity fires cause tar and creosote to deposit in the chimney after a long period
of time. Tar and creosote are highly combustible substances. Thicker layers of these
substances might catch fire when the temperature in the chimney increases suddenly
and steeply. Therefore it is necessary for the fire to regularly burn very intensely, so that
thin layers of tar and creosote immediately disappear.
Low intensity fires also cause tar to deposit on the stove panes and doors.
When it is not too cold outside it is better to let the stove burn intensely for just a few
hours a day.
4.4. Burning coal
WHEN BURNING CHARCOAL THE AIR SLIDE ABOVE MUST ALWAYS BE KEPT CLOSED.
As soon as the fire is sufficiently stable and there is enough glow, the first shovel of
coals can be put onto the fire. Complete the filling once the coals have caught fire. Make
sure you do not quench the fire by putting too much coals onto it at a time.
Once the fire has burned for a while, adjust the air slide at the bottom of the door.
Before adding some extra coals, open the air slide below completely. Use the shaker
grate or the supplied shovel, and shake till the glowing parts fall into the ash plate; then
add the coals. After a few minutes, adjust the air slide. Add some more coals until you
can only see the glow of the previous filling.
When the fire basket or the cast-iron plate fins are red-hot, you are heating too
intensely.
32


Need help? Post your question in this forum.

Forumrules
1

Forum

dru-44-mf

Reset search

  • What's the easiest way to replace the door seal rope on the dru 44 Submitted on 7-10-2022 at 14:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU 44 MF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU 44 MF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info