801275
21
Zoom out
Zoom in
Previous page
1/72
Next page
Instructions for use ST4D 2G / ST4D 2G PLUS
21
Drive Medical GmbH & Co. KG | As per: 04.05.2020 | Errors and alterations excepted
EN
Instrument panel
1. On/O light / Error code display
2. Battery display
3. Speed controller
4. Control lever
5. Warning light
6. Indicators
7. Fast/slow drive switch
8. Horn
Use
Ignition key
To start the electric scooter, turn the key to the right; the
instrument panel is now lit up. To switch o, turn the key
to the left; the instrument panel turns o and the key can
be removed.
Warning: Never switch o the ignition while you are
driving since this leads to an immediate stop and possi-
ble damage or injury.
Control levers
The electric scooter is driven by operating the control
lever on the side of the instrument panel. To drive the
electric scooter forwards, move the right control lever in
the direction of the operator. To drive the electric scooter
backwards, move the left control lever in the direction of
the operator. The horn generates a beep when the ve-
hicle moves backwards. The longer the control lever is
pressed, the faster the electric scooter moves.
To stop the electric scooter, release the control lever; the
electromagnetic brake automatically engages.
Warning: Never operate the left and right control levers
at the same time.
Brakes
By releasing the control lever, the vehicle brakes auto-
matically. When the vehicle comes to a stop, the mag-
netic brake automatically closes. The scooter is now se-
cured against rolling away.
In an emergency, the user can stop the electric scooter
by operating the hand brake on the right on the hand grip
of the steering column.
Warning: Never put the vehicle into neutral on inclines. In
this case, the brake will not grip.
Setting the speed
The speed of the elec-
tric scooter can be in-
creased by turning the
speed controller to the
right (rabbit symbol) or
reduced by turning the
speed controller to the
left (turtle symbol).
Warning: Never adjust the speed setting while driving
since this can lead to a loss of control. Do not select the
maximum speed when driving indoors.
When the electric scooter is used indoors or in pedes-
trian areas (such as sidewalks or shopping areas), the
lowest speed setting should be selected. If the electric
scooter is used on the street, the high speed setting can
be selected.
Press the “snail” button (no. 7 / pic. 1) to switch between
the two speed levels. In the slow speed level, the speed
is reduced by about half.
Warning: Always use the low speed setting when you
are driving indoors or on a sidewalk.
Note: Set the speed to maximum to drive up an incline
and to minimum for driving downhill.
Horn
By pressing the “horn” button, a beep sounds; the beep
is muted as soon as you release the button.
Indicators
Use the respective indicator to indicate your direction
when driving around a curve. Press the same button
again to switch o the indicator.
Light
Turn the ignition key all the way to the right to switch on
the light.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive ST4D 2G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive ST4D 2G in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info