801298
18
Zoom out
Zoom in
Previous page
1/52
Next page
18
Instructions for use FREETEC
Drive Medical GmbH & Co. KG | As per: 28.04.2021 | Errors and alterations excepted
EN
Seat depth adjustment
Upon delivery, the seat depth of all models is set at 43
cm. This seat depth can be adjusted in a total of four in-
crements up to 50 cm. Before adjusting the seat depth,
open both Velcro fasteners on the seat cushion (photo
13) and fold the front part of the cushion forwards (photo
14).
13 14
To adjust the seat depth, remove both screws on the up-
per longitudinal tube on both sides (photo 15) as well as
the four screws below on the wheel mount fork, left and
right (photo 16).
15 16
Now you can pull the frame forward to the next hole (a
total of three times) and reinsert the screws.
Ensure that all screws are reinserted and tightened!
Fold the front seat cushion back again and refasten the
Velcro fasteners.
Adjusting the backrest and cushion
The degree of firmness of
the backrest can be indi-
vidually and continuously
adjusted using the 5 Vel-
cro straps (loosen or tigh-
ten) (photo 17).
To attach the back cushion,
place it as shown (pho-
to 18) on the wheelchair
and fold it over in succes-
sive parts.
Place part 1 on the inside
of the backrest, part 2 on
the back side, and smooth
part 3 from behind under
the seat surface.
The cushion is secured automatically by the integrated
Velcro straps (photo 19+20).
19 20
Adjusting the height of the backrest
The height of the backrest
can be adjusted in incre-
ments.
Note: When the backrest
is adjusted, the height of
the push handles is also
automatically adjusted.
To adjust the backrest,
remove the left and right
nuts under the guide tube
of the backrest (photo 21).
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive Freetec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive Freetec in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 9.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info