569668
5
Zoom out
Zoom in
Previous page
1/25
Next page
5
Using The Camera
Initial Setup
1. Unscrew the rear hatch of the camera by hand, or by using the notch in the
Universal Clip (anti-clockwise movement).
2. Slide the catch and open the battery slot cover, insert the battery as above and
close the cover.
3. Insert a micro SD card into the card slot, as above, until you hear a click.
4. Connect the camera by the mini USB cable (provided) to a powered USB port
and charge for 4 hours before first use.
5. Replace the rear hatch, ensuring the arrow indicator points to the camera face
with the control buttons.
6. Connect the Two-Way Remote Control by the mini USB cable (provided) to a
powered USB port and charge for 2 hours, or until remote LED indicator lights
turn green before first use.
Powering On and O
Press and hold the ACTION button on the camera—the camera LED indicator
and screen will power on and display a welcome message.
To power o, hold the ACTION button for 3 seconds, or until the camera LED
indicator and screen power o.
Charging
1. Ensure the battery is inside the camera and the camera is powered o.
2. Connect the mini USB cable to the port at the rear of the camera and then
to a powered USB port in your computer, other USB device or USB power
adaptor (not included).
! If connected to a computer, the camera screen will show a USB symbol.
! If connected to a USB power adaptor, the screen will show ‘Charging....
3. A full charge takes around 4 hours (min 1A)—once the camera is fully charged,
remove the mini USB cable and replace the rear hatch and screw closed.
Battery Life
At a temperature of 25°C (77°F), with all power saving features o and the camera
recording continuously, the battery will last for about 3.5 hours (1080p 30FPS,
Wi-Fi o, normal bit rate) on a full charge (see Conserving Battery Life, p20).
Using an External Power Supply
The camera can be powered by an external power supply such as a USB power
adaptor, Drift Power Pack or Drift 12V Charger. We recommend you to power o
your camera before plugging your camera to any external power supply.
Press the ACTION button to begin normal usage when using an external power
supply. If the external power is cut o for any reason during recording, the
camera will immediately start drawing power from the rechargeable battery
instead and continue recording, protecting your footage from file corruption.
Selecting a Micro SD Card
The Drift Ghost-S is compatible with
Micro SD, SDHC or SDXC cards up to
64GB. We recommend Class 10 cards
for recording HD video and system
stability.
Below is a table of approximate video
recording times against card size in
normal bit rate mode.
Approximate Recording Time (30 FPS)
1080P 720P WVGA
1 GB 9min 12min 27min
2 GB 18min 24min 54min
4 GB 36min 48min 1h 48min
8 GB 1h 12min 1h 36min 3h 36min
16 GB 2h 24min 3h 12min 7h 12min
32 GB 4h 48min 6h 24min 14h 24min
64 GB 9h 36min 12h 48min 28h 48min
Formatting a Micro SD Card
Formatting will remove all files from a
memory card. When using a new card
for the first time, always format the
memory card using the camera. With
the card inserted in the camera:
1. Open the Main Menu (see p6) and
select ‘Camera Settings’.
2. Select ‘Format Memory Card, press
ACTION and then confirm.
Formatting may take a few moments
to complete—please be patient.
Removing a Micro SD Card
To remove the card, push it until you hear
a click. The card slot is spring loaded and
the card will slide from the slot.
Figure 8: Inserting the Battery and Micro SD Card
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drift GHOST-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drift GHOST-S in the language / languages: English as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Drift GHOST-S

Drift GHOST-S Quick start guide - English, German, French, Italian, Spanish - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info