488610

Dremel Fortiflex 9100 Manual

11
Zoom out
Zoom in
Previous page
1/132
Next page
11
ASSEMBLY
FIGURE 1
A = Power cord
B = Foot pedal
C = Hanging motor
D = On/Off switch
E = Hanger
F = Flexible shaft
G = Hand piece
H = Wall mounting piece
I = Metal hook
J = Allan key
K = Key
GENERAL
1. Mount the inner shaft to the spindle of the motor. FIGURE 2
2. Mount the outer shaft to the motor by turning it counter-
clockwise. FIGURE 3
3. Mount the hand piece on the other end of the shaft. FIGURE 4
4. Mount the metal hook to the wall just above where you work.
5. Connect the motor to the foot pedal. Connect the foot pedal to
the outlet. FIGURE 5
Do not connect the motor to the outlet directly.
6. Hang the motor on the hook.
CHANGING ACCESSORIES
1. Check if switch is in “0” position.
2. Use key to unlock and lock accessories in the chuck. FIGURE 6
GETTING STARTED
USE
1. On/off switch
Switch on/off the tool by pushing knob D (FIGURE 1) in
“I”/”0” position.
2. Foot speed control
Control the speed stepless with your foot by applying less or
more pressure on the pedal. FIGURE 7
HOLDING AND GUIDING THE TOOL
• Pencil grip for precision work (engraving). FIGURE 8
• Hand grip for rough work (grinding). FIGURE 9
Do not bend shaft at tight angles. FIGURE 10
APPLICATION ADVICE
• Tool is intended to be used for woodworking, jewellery
making, stone working and artisan projects.
• When used with the appropriate accessories this tool can be
applied for grinding, sanding, cutting, engraving, polishing,
drilling.
• Recommended speed
low – medium precise drilling, polishing
medium – high sanding, cutting, engraving
• Always practice on a piece of scrap material first to choose
the right accessory and determine the optimum working
speed.
• Do not apply too much pressure on the tool; let the speed
do the work for you.
MAINTENANCE
• Flexible shaft needs to be lubricated regularly:
– switch off tool and remove plug from power source.
– remove hand piece.
– remove outer shaft by turning it clockwise. FIGURE 3
– lubricate inner shaft with lubrication grease. Do not use
too much grease.
– mount outer shaft by turning it counter-clockwise.
– mount hand piece.
• Excessive sparking mostly indicates worn-out carbon brushes.
CLEANING THE TOOL
DISCONNECT THE PLUG BEFORE CLEANING
• Keep tool and cord clean (some household cleaning products
and solvents can damage plastic parts; these products include
among others benzene, trichloroethylene, chloride, ammonium).
Ventilation openings and switch levers must be kept clean and
free of foreign matter. Do not attempt to clean by inserting
pointed objects through openings.
The tool may be cleaned with compressed air. Always wear safety
goggles when cleaning tool with compressed air.
SERVICE AND WARRANTY
This DREMEL product is guaranteed in accordance with
statutory/country-specific regulations; damage due to normal
wear and tear, overload or improper handling will be excluded
from the guarantee.
In case of a complaint, send the tool undismantled together with
proof of purchase to your dealer.
CONTACT DREMEL
For more information on the Dremel assortment, support and
hotline, go to www.dremel.com
Dremel Europe, P.O. Box 3267, 4800 DG Breda, The Netherlands
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dremel Fortiflex 9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dremel Fortiflex 9100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info