Manual Dremel Fortiflex 9100 (page 8 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

488610

Zoom out

Zoom in

1/132

ORIGINAL INSTRUCTIONS

WARNING

READ ALL INSTRUCTIONS.

Failure to follow all instructions

listed below may result in electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings listed below refers to

your mains-operated (corded) power tool.

SAVE THESE INSTRUCTIONS

WORK AREA

a. Keep work area clean and well lit. Cluttered and dark areas

invite accidents.

b. Do not operate power tools in explosive atmospheres, such

as in the presence of ﬂammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or

fumes.

c. Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

a. Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such

as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or

grounded.

c. Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable,

use an earth leakage circuit breaker. Use of an earth

leakage circuit breaker reduces the risk of electric shock.

PERSONAL SAFETY

a. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power tool

while you are tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention while operating

power tools may result in serious personal injury.

Use safety equipment. Always wear eye

protection. Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c. Avoid accidental starting. Ensure the switch is in the off

position before plugging in. Carrying power tools with your

finger on the switch or plugging in power tools that have the

switch on invites accidents.

d. Remove any adjusting key or wrench before switching the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in

unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught in

moving parts.

g. If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of these devices can reduce dust related

hazards.

h. Do not work materials containing asbestos (asbestos is

considered carcinogenic).

i. Take protective measures when during work dust can

develop that is harmful to one's health, combustible or

explosive (some dusts are considered carcinogenic); wear

a dust mask and work with dust/ chip extraction when

connectable.

j. Disconnect the plug from the power source and/or the

battery pack from the power tool before making any

adjustments or changing accessories. Accidental starting of

the power tool is a cause of some accidents.

k. Properly assemble the working stand before mounting

the tool. Proper assembly is important to prevent risk of

collapse.

l. Securely fasten the power tool to the working stand before

use. Power tool shifting on the working stand can cause loss

of control.

m. Place the working stand on a solid, flat and level surface.

When the working stand can shift or rock, the power tool or

workpiece cannot be steadily and safely controlled.

POWER TOOL USE AND CARE

a. Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job

better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not switch it on

and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before making

any adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the power tools operation. If damaged, have the

power tool repaired before use. Many accidents are caused

by poorly maintained power tools.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dremel Fortiflex 9100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dremel Fortiflex 9100 Manual

Product: