488591
15
Zoom out
Zoom in
Previous page
1/120
Next page
DSM510
Reinforced Type 1 Abrasive cut-off wheel
which is intended to cut a variety of materials
such as metal and plastic.
DSM520
Reinforced Type 1 Abrasive cut-off wheel
which is intended to make sore cuts in
masonry and stone.
DSM540
Diamond abrasive wheel which is intended to
make cuts in hard materials such as marble,
concrete, brick, porcelain, and tile.
DSM600
Offset abrasive cutting wheel with carbide grit
which is intended to cut wood and other soft
materials.
MAINTENANCE
Preventive maintenance performed by unauthorized personnel
may result in misplacing of internal wiring and components which
could cause serious hazard. We recommend that all tool service
be performed by a Dremel Service Facility. To avoid injury from
unexpected starting or electrical shock, always remove plug from
wall outlet before performing service or cleaning.
CLEANING
!
WARNING
TO AVOID ACCIDENTS, ALWAYS
DISCONNECT THE TOOL AND/OR
CHARGER FROM THE POWER SUPPLY BEFORE CLEANING. The
tool can be cleaned most effectively with compressed dry air.
Always wear safety goggles when cleaning tools with compressed air.
Ventilation openings and switch levers must be kept clean and
free of foreign matter. Do not attempt to clean the tool by inserting
pointed objects through an opening.
!
WARNING
CERTAIN CLEANING AGENTS AND
SOLVENTS DAMAGE PLASTIC PARTS.
Some of these are: gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household detergents that contain
ammonia.
SERVICE AND WARRANTY
!
WARNING
NO USER SERVICEABLE PARTS INSIDE.
Preventive maintenance performed by
unauthorized personnel may result in incorrect connection of internal
wiring and components which could cause serious hazard. We
recommend that all tool service be performed by a Dremel Service
Centre. SERVICEMEN: Disconnect the tool and/or charger from the
power source before servicing.
This DREMEL product is guaranteed in accordance with statutory/
country-specific regulations; damage due to normal wear and tear,
overload or improper handling are excluded from the warranty.
In case of a complaint, send the undismantled tool or charger and
proof of purchase to your dealer.
CONTACT DREMEL
For more information on the Dremel product range, support and
hotline, go to www.dremel.com.
Dremel Europe, P.O. Box 3267, 4800 DG Breda, The Netherlands
ÜBERSETZUNG DER
ORIGINALBEDIENUNGSANLEITUNG
VERWENDETE SYMBOLE
LESEN SIE DIESE ANWEISUNGEN
TRAGEN SIE AUGENSCHUTZ
TRAGEN SIE GEHÖRSCHUTZ
DOPPELT ISOLIERT (KEIN SCHUTZLEITER
ERFORDERLICH)
ELEKTROWERKZEUGE, ZUBEHÖR UND
VERPACKUNGSMATERIAL NICHT MIT DEM
HAUSMÜLL ENTSORGEN
ALLGEMEINE WARNHINWEISE FÜR
ELEKTROWERKZEUGE
!
WARNUNG
LESEN SIE ALLE
WARNHINWEISE UND ALLE
ANWEISUNGEN. Nichtbeachtung der Hinweise und Anweisungen
kann zu elektrischem Schlag, Bränden und schweren Verletzungen
führen.
Bewahren Sie alle Warnungen und Anweisungen für die Zukunft
auf.
Die Bezeichnung Elektrowerkzeug in den Warnhinweisen bezieht sich
sowohl auf Werkzeuge, die mit Netzspannung betrieben werden
(Werkzeuge mit Netzkabel), als auch auf akkubetriebene Werkzeuge
(Werkzeuge ohne Netzkabel).
SICHERHEIT AM ARBEITSPLATZ
a. Halten Sie Ihren Arbeitsbereich sauber und aufgeräumt.
Unordnung und unbeleuchtete Arbeitsbereiche können zu
Unfällen führen.
b. Arbeiten Sie mit dem Gerät nicht in explosionsgefährdeter
DE
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dremel DSM20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dremel DSM20 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 12,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info