488591
12
Zoom out
Zoom in
Previous page
1/120
Next page
C. Abrasive wheel
D. Line guide
E. Foot
F. Flush cut foot
G. Spindle lock
H. Ventilation openings
I. Cord
J. Depth adjustment lever
K. Dust port
L. Depth scale
INSTALLING AND REMOVING ACCESSORIES
!
WARNING
DISCONNECT THE PLUG FROM THE
POWER SOURCE BEFORE MAKING ANY
ASSEMBLY, ADJUSTMENTS OR CHANGING ACCESSORIES. Such
preventive safety measures reduce the risk of starting the tool
accidentally.
Standard flat wheel assembly
1. Turn LOCK BOLT with wrench provided clockwise and
remove LOCK BOLT and OUTER WASHER. If the shaft
moves while attempting to loosen the lock bolt press the
spindle lock. PICTURE 2
2. Slide wheel behind the guard face and mount it against the
INNER WASHER on the shaft.
3. Reinstall OUTER WASHER and tighten lock bolt finger tight.
4. Press spindle lock to lock shaft and tighten LOCK BOLT
counter-clockwise until tight with the wrench provided. NOTE:
Be sure to read the instructions supplied with your Dremel
accessory for further information on its use.
PICTURE 2
A. Standard flat wheel
B. Flush cutting wheel (optional)
C. Standard flat wheel
D. Deburring stone (optional)
E. Wrench
F. Lock bolt
G. Outer washer
H. Guard face
I. Inner washer
J. Spindle lock
PICTURE 3
A. Standard wheel
B. Guard face
Flush cutting wheel assembly
1. Repeat step 1 of above.
2. Place flush cutting wheel against the INNER WASHER on the
spindle shaft. PICTURE 4
3. Reinstall OUTER WASHER and tighten LOCK BOLT finger
tight.
4. Press spindle lock to lock shaft and tighten LOCK BOLT
counter-clockwise until tight with the wrench provided.
PICTURE 4
A. Flush cutting wheel
Deburring stone assembly
1. Repeat step 1 of above.
2. Place flat wheel against the INNER WASHER on the spindle
shaft. PICTURE 5
3. Install DEBURRING STONE instead of outer washer and
tighten finger tight.
4. Press spindle lock to lock shaft and tighten DEBURRING
STONE counter-clockwise until tight with the wrench provided.
PICTURE 5
A. Standard wheel flat
B. Deburring stone
DUST EXTRACTION
Your tool is equipped with a dust port for dust extraction. To use
this feature, insert dust port adapter (optional accessory) into
dust port, attach vacuum hose into the adapter, then connect the
opposite end of the hose to a shop vacuum cleaner. PICTURE 6
PICTURE 6
A. Dust port
B. Dust port adapter (optional accessory)
C. Vacuum hose (not included)
USE
GETTING STARTED
Thank you for purchasing the Dremel DSM20. This tool was
designed to tackle a wide variety of projects in and around the
home. The Dremel DSM20 completes tasks quicker and more
efficiently than a series of other tools that would be needed to
complete a job or project. This tool is also compact, ergonomic,
and cuts virtually all common materials.
After using your new Dremel DSM20 you’ll find that it is the right
size tool to get projects done at just a fraction of the size of a
traditional circular saw. With a full line of accessories the tool cuts
through virtually any common material in the home- wood, plastic,
metal, drywall and tile. The tool also features two cutting wheel
positions, one position using a standard flat wheel for all your
typical straight cuts and a second position for making flush cuts
along flooring or against a wall.
In addition to versatility, the Dremel DSM20 provides excellent line
of sight for confident, precise cuts so you will get accurate cuts
the first attempt and avoid wasting time or material.
Visit www.dremel.com to learn more about what you can do with
your new Dremel tool.
!
WARNING
HOLD THE TOOL WITH BOTH HANDS
WHILE STARTING THE TOOL, SINCE
TORQUE FROM THE MOTOR CAN CAUSE THE TOOL TO TWIST.
Start the tool before applying to work and let the tool come to
full speed before contacting the workpiece. Lift the tool from the
work before releasing the switch. DO NOT turn the switch “ON”
and “OFF” while the tool is under load; this will greatly decrease
the switch life.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dremel DSM20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dremel DSM20 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 12,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info