25131
13
Zoom out
Zoom in
Previous page
1/68
Next page
Page 13
Operating Speeds For Accessories
Set the speed indicator to fit the job to achieve the
best job results when working with different
materials.
To select the right speed for each job, use a practice
piece of material. Vary speed to find the best speed
for the accessory you are using and the job to be
done.
On the Model 750, there is a LO and HI switch. When
the switch indicator is in position 1 or LO, the tool runs
at about 6,500 RPM. When the switch indicator is in
position 2 or HI, the tool runs at about 13,000 RPM.
On Model 754, there is a LO and HI switch. When the
switch is in position 1 or LO, the tool runs at about
5,000 RPM. When the switch is in position 2 or HI, the
tool runs at about 10,000 RPM.
On the Model 770, there is a LO and HI switch. When
the switch indicator is in position 1 or LO, the tool runs
at about 10,000 RPM. When the switch indicator is in
position 2 or HI, the tool runs at about 20,000 RPM.
You can refer to the charts on pages 14 and 15 to
determine the proper speed, based on the material
being worked and the type of cutter or other accessory
being used. These charts enable you to select both the
correct accessory and the optimum speed at a glance.
Needs for Slower Speeds
Certain materials, however, (some plastics, for ex-
ample) require a relatively slow speed because at high
speed the friction of the tool generates heat and caus-
es the plastic to melt.
Most work is done at high speed on your Cordless
Rotary Tool. Lower speeds are needed only for certain
tasks.
The speed of Models 750, 754 & 770 is controlled by
setting this indicator on the housing.
The Cordless Rotary Tool model 770 can be used with
some Dremel attachments that screw onto the nose of
the tool.
Model 770 can be used with the 568 Grout Removal
attachment, 675 Lawnmower and Garden Tool
Sharpener, and the 1453 Chainsaw Sharpener attach-
ment.
Use of other Dremel attachments not listed is not rec-
ommended. Dremel attachments cannot be used with
the cordless tool model 750 and 754.
Using the Cordless Rotary Tool Model 770 with Attachments
DM 2610925743 02-05 2/7/05 9:33 AM Page 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dremel 750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dremel 750 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info