Manual Dremel 3000 (page 22 of 104) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

488592

Zoom out

Zoom in

1/104

electric shock. Damaging a gas line can lead to explosion.

Penetrating a water line causes property damage or may

cause an electric shock.

d. When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

e. Secure the workpiece. A workpiece clamped with clamping

devices or in a vice is held more secure than by hand.

f. Keep your workplace clean. Blends of materials are

particularly dangerous. Dust from light alloys can burn or

explode.

g. Wear protective gloves when changing application tools/

accessories. Application tools/accessories become hot after

prolonged usage.

h. Do not treat the surface to be worked with solvent-

containing fluids. Materials being warmed up by the

scraping can cause toxic vapours to develop.

i. Exercise extreme caution when handling the scraper. The

accessory is very sharp; danger of injury.

WARNING

DO NOT WORK WITH MATERIALS

CONTAINING ASBESTOS (ASBESTOS IS

CONSIDERED CARCINOGENIC).

WARNING

TAKE PROTECTIVE MEASURES WHEN

DURING WORK DUST CAN DEVELOP

THAT IS HARMFUL TO ONE’S HEALTH, COMBUSTIBLE OR

EXPLOSIVE (SOME DUSTS ARE CONSIDERED CARCINOGENIC);

WEAR A DUST MASK AND WORK WITH DUST/ CHIP

EXTRACTION WHEN CONNECTABLE.

ENVIRONMENT

DISPOSAL

The machine, accessories and packaging should be sorted for

environmental-friendly recycling.

ONLY FOR EC COUNTRIES

Do not dispose of power tools into household waste!

According the European Guideline 2002/96/EC for

Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that are

no longer usable must be collected separately and

disposed of in an environmentally correct manner.

SPECIFICATIONS

GENERAL SPECIFICATIONS

Voltage Rating 230 V, 50 Hz

Rated Power 130W

Rated Speed 33 000 RPM

Collet Capacity 0.8mm, 1.6mm, 2.4mm, 3.2mm

Class II construction Double insulated construction tools

EXTENSION CORDS

Use completely unrolled and safe extension cords with a capacity

of 5 Amps.

MOTOR SPECIFICATIONS

This multitool utilizes a variable high speed motor. It is wired for

operation on 230 V, 50 Hz. Always check that the supply voltage

is the same as the voltage indicated on the nameplate of the tool.

ASSEMBLY

ALWAYS UNPLUG MULTITOOL BEFORE CHANGING

ACCESSORIES, CHANGING COLLETS, OR SERVICING THE

TOOL.

GENERAL

The Dremel multitool is a high quality precision tool that can be

used to perform detailed and intricate tasks. The wide range of

Dremel accessories and attachments allow you to perform a large

variety of tasks. These include tasks such as sanding, carving and

engraving and routing, cutting, cleaning and polishing.

PICTURE 1

A. Collet nut

B. Collet

C. EZ Twist™ integrated wrench/nose cap

D. Shaft lock button

E. On/Off switch

F. Hanger

G. Cord

H. Ventilation openings

I. Brush cover (one on each side)

J. Ventilation openings

COLLETS

The Dremel accessories available for the multitool come

with various shank sizes. Four size collets are available to

accommodate the different shank sizes. Collet sizes are identified

by the rings on the back of the collet.

PICTURE 2

K. 3.2 mm Collet without ring (480)

L. 2.4 mm Collet with three rings (481)

M. 1.6 mm Collet with two rings (482)

N. 0.8 mm Collet with one ring (483)

NOTE: Some multitool kits may not include all four collet sizes.

Collets are available separately.

Always use the collet which matches the shank size of the

accessory you plan to use. Do not force a larger diameter shank

into a smaller collet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dremel 3000 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 8,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dremel 3000 Manual

Product: