768206
31
Zoom out
Zoom in
Previous page
1/52
Next page
9.0 INSTALLATION SETTINGS
R699820 - Yunzi Series User Manual 31
Intensity (2D to 3D Conversion is On)
Because the 2D to 3D Conversion may not detect the correct depth of the picture elements, you can use this
function to enhance the depth perception during the conversion. Adjust setting from 1 up to 5.
Subtitle Adjust (2D to 3D Conversion is On)
Use this function to automatically identify subtitles during 2D to 3D conversion. There may be instances where
automatic identification does not work, or video images are accidentally identified as subtitles and therefore not
converted into 3D. Set if On or Off.
8.9 Expert Calibration (Yunzi 2 & 3)
Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional sets
of Picture Modes can be activated. Each set designated as THX and ISF profiles have to be calibrated. Once done,
these profiles are stored and displayed in the picture mode menu list but will not be modifiable. Additionally the
Calibrator can certify his action by setting in the Information Menu his name or company name. See “RS-232C
protocol”, page 40 for more details.
9.0 INSTALLATION SETTINGS
9.1 Lens Control
This menu gives access to the control of the lens. Browse into this menu for the following adjustments.
Focus
Adjust the lens focus to obtain a clear picture.
Zoom
Adjust the lens zoom to fill the screen with the picture.
Shift
Adjust lens shift to center the picture into the screen.
Image Pattern
If set to On, an internal pattern will be generated to adjust the current setting. If you want to use an external
generator, turn this option to Off.
Lock
Once the Lens is correctly set, you may lock this setting menu by turning the Lens control Lock to On. Any attempt
to access the Lens control menu will lead to the display of a warning message.
Lens Memory Select
Call up saved lens adjustment data to configure the lens to the save settings.
Lens Memory Save
Store into an available memory the lens focus, zoom and shift configuration. There are 5 memories for Yunzi 1 and
10 memories for Yunzi 2 & 3.
Lens Memory Name Edit
You can edit the Lens Memory Name within the limit of 10 characters. Same procedure as Section , “User Name
Edit”, page 28.
Lens Center
Reset the lens position to the original, central position.
Lens Cover (Yunzi 2 & 3)
Control the behavior of the Lens Cover:
•Auto: the lens cover opens or closes when the projector switches On or Off.
Open: the lens cover is always open.
9.2 Pixel Adjust
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Yunzi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Yunzi in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info