768201
29
Zoom out
Zoom in
Previous page
1/48
Next page
6.0 MENU AND PICTURE SETTING
R699780 - Starlight User Manual 29
•Vertical Blue (1 to 5)
Installation Style
Flip the image to the left or right, up or down according to the projection state of the projector:
Front, Ceiling Mount (F), Rear or RearCeiling mount (R)
Keystone
Compensate for trapezoidal distortion caused by installation. Independently to the screen orientation, make sure
that the projector is not tilt more than 5% left/right and 15% up/down.
Screen Adjust
This setting corrects the color balance derived from the reflective characteristics of the screen without altering the
global picture settings. You may select:
Off: No modification
Mode A: slightly reddish
Mode B: slightly greenish
Mode C: slightly bluish
6.5 Display Setup Menu
Back Color
Configures the screen color displayed when there is no active input. Set to Blue or Black.
Menu Position
Upper left, Upper right, Center, Lower right, Lower left.
Menu Display
15sec: Display menu for 15 seconds before fade out.
On: Always display menu.
Line Display
5sec: Display the input settings for 5 seconds after input selection.
Off: Don’t display
Source Display
On: Display the source of the input signals after input. selection
Off: Don’t display.
Logo
On: Display logo during startup for 5 seconds.
Off: Don’t display.
Language
Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norvegian, Russian and Chinese.
6.6 Function Menu
Lamp Power
The Lamp Output function is used to configure the light output of the lamp. Select Normal to set the lamp to 150W
or High, 200W. To avoid any damage to the lamp, you can’t changed the lamp power within 90 seconds from the
projector startup or 60 seconds after lamp power change.
Trigger
The 12V trigger output can be used to control any 12V remoted compatible devices such as motorized screens or
anamorphic kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
Off: 12V trigger voltage state is always low.
On (power):12V trigger state is high when the projector is powered ON.
On(V-Stretch): 12V trigger is high only when V-Stretch is active. To be used with Anamorphic kits or 2.35
motorized screen.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Star Light at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Star Light in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info