768203

DreamVision Siglos X-TRA Manual

19
Zoom out
Zoom in
Previous page
1/44
Next page
PICTURE ADjUST
R699890 - Siglos X-tra Series User Manual 19
• Reference color prole is used to reproduce faithfully the source colors.
• THX color prole is reserved for the THX picture modes.
• x.v.Color matches the color space of x.v.Color standard.
x.v.Color inputs may be incorrectly decoded with the picture prole presets. To obtain the correct colors,
set the Picture mode to a User picture mode” and select x.v.Color in the “Color Prole” selection.
The User picture modes can be renamed to any more convenient name.
7.2  Advanced Picture Mode
Clear Black
Smooth out the black areas to obtain clear zone by eliminating electronic white noise and enhancing the brightness
to obtain a more contrasted picture. Turn it Off or set the correction to Low for a mild effect or High for a strong
effect.
Lamp Power
Set the lamp power used by the current Picture Prole. For standard viewing conditions, the lamp power is set to
Low. To obtain a brighter image, set it to High but this setting may cause the lamp to darken faster.
To avoid any damage to the lamp, you shouldn’t change the lamp power within 90 seconds from the
projector startup or 60 seconds after lamp power change.
Lens Aperture and High Contrast Images
The lens is equipped with a variable electronic aperture. This function is used with a real time analysis of the video
picture projected that optically adjusts the light output depending on the viewing conditions by controlling the
aperture dynamically. Thanks to sensitive and perfectly controlled adjustments, the contrast image is drastically
boosted. When set to Auto 1, this setting makes the iris to automatically set to the optimal opening to enhance
the picture contrast. The Auto 2 setting, the result obtained is altered so that the gradation is more visible. The
Manual setting sets the iris to a xed position, adjust the aperture from partially closed (-15) to fully opened (0).
User Name Edit
You can edit the picture modes names User 1 to User 5 using a maximum length of 10 characters. You can use
alphabet letters, numbers and symbols:
User Name Edit
MENU
BACK
>>
Name User 1
Clear All Clear OK
Exit
Select
Operate
Picture Adjust
SPACE
Select cursor Input cursor
Character list
a) Select the user name you want to edit from User 1 to User 5. Press [OK] to enter the edit mode.
b) The input cursor displays the place where the new character will be insert. It moves automatically as a
character is selected. Use [UP], [DOWN], [LEFT] or [RIGHT] to select a character and press [OK] to insert.
c) Press [BACK] to exit edit mode.
Clear: To delete a character: Move the cursor to the desired location and press [OK] to delete the specic
character. All Clear: To delete all characters. OK: To save the current name, a save conrmation will appear.
7.3  AdvancedColorProle
Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional
sets of Picture Modes can be activated. Each set designated as THX and ISF proles have to be calibrated. Once
done, these proles are stored and displayed in the picture mode menu list but will not be modiable. Additionally
the Calibrator can certify his action by setting in the Information Menu his name or company name.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Siglos X-TRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Siglos X-TRA in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info