768198

DreamVision Siglos Ultra Manual

30
Zoom out
Zoom in
Previous page
1/44
Next page
R699880 - Siglos Ultra Series User Manual
INFORMATION MENU
30
13.4  Network
When the Communication Terminal selected is LAN, this unit will be visible on the local Network and the following
parameters need to be configured. Refer to section “17.2 LAN protocol”, page 37 for more details.
13.5  Remote Code A or B
Select in the projector menu the code A or B according to the code selected on the RCU. You can change the code
used by the RCU to communicate with the projector from A to B. To do so, press and hold for 3 sec simultaneously
[MENU]+[BACK] buttons on the RCU. All the buttons on the RCU will blink.
• Two blinks indicate that B code is used.
• Three blinks indicate that A code is used.
13.6  Lamp Reset
Resets the lamp use time to “0” during the lamp replacement procedure. See Section “16.3 Replacing the Lamp”,
page 32 for more details.
14.0 INFORMATION MENU
Input Terminal and Input Source
Displays the active video input and the type of the current video input signal.
Resolution and H. and V. Frequency
If the active input is PC input, its resolution, Horizontal and Vertical frequencies are displayed.
Color Depth
Displays the color bit depth of the input video signal.
Colorimetry
Displays the color space and color depth of the input signal.
HDR
Displays if the source uses the HDR encoding or not.
Lamp Time
Displays the accumulated hours of usage of the lamp.
PS Version
Displays the current software version.
Calibrator
Stores up to 18 ASCII characters set by the Calibrator. Shown only if set during ISF profile adjustment.
15.0 CINEMASCOPE SETUPS
15.1  Lens Zoom or Static Cinemascope kit
The Siglos Ultra Series centralizes the controls and automation commands for a unique, versatile and unexpectedly
simple to operate 2.35:1 theatre experience using Lens Zoom or the Static Cinemascope kit.
• Up to 10 lens position memories
• Integrated Constant Image Width (CIW) scaling algorithm with anamorphic mode A and mode B.
• Dedicated commands to control the picture sizes and aspect ratios on a 2.35:1 screen.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Siglos Ultra at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Siglos Ultra in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info