768191
33
Zoom out
Zoom in
Previous page
1/48
Next page
INFORMATION MENU
R699900 - Eos Series User Manual 33
simultaneously [MENU]+[BACK] buttons on the RCU. All the buttons on the RCU will blink.
Two blinks indicate that the RCU uses code B.
Three blinks indicate that the RCU uses code A.
If the Remote Control Unit (RCU) code differs from the projector remote code setting, then the Standby /
On LED indicator will blink green when receiving the remote control orders.
14.6  High Altitude Mode
Set High Altitude Mode to “On” when using this unit at a place with a low atmospheric pressure or located at
an altitude of 900 meters (3,000 ft) above sea level or higher. This will improve the fan efciency and help in
preventing the projector to overheat.
14.7  Lamp Reset
Resets the lamp use time to “0” during the lamp replacement procedure. See Section “Resetting Lamp Time”,
page 37 for more details.
14.8  Factory Reset
Conrm to reset all this unit settings to default settings at once except the settings stored in memory below:
Gamma Data saved into Gamma => Correction Value => Import
Color Prole Data saved into Color Prole => Custom 1 up to Custom 6
14.9  Software Update
Conrm to start the update procedure. Make sure that a valid software le must be loaded on an USB stick and
that this stick is fully inserted in the USB/Update input located at the rear of this unit.
15.0 INFORMATION MENU
Input Terminal and Input Source
Displays the active video input and the type of the current video input signal.
Resolution and H. and V. Frequency
If the active input is PC input, its resolution, Horizontal and Vertical frequencies are displayed.
Color Depth / Color Space
Displays the color bit depth of the input video signal. N.A. with YCbCr (4:2:2) input.
Colorimetry
Displays the color space and color depth of the input signal. Also detects HDR color encoding like BT.2020.
HDR
Displays the EOTF information when HDR packet is received.
MaxCLL and MaxFALL
When explicitly present in the source meta data container, it displays the levels in nits of the brightest pixel of the
stream (MaxCLL) and the level of the brightest frame of the stream, MaxFALL.
Lamp Time
Displays the accumulated hours of usage of the lamp.
Soft Version
Displays the current software version.
Calibrator
Stores up to 18 ASCII characters set by the Calibrator. Shown only if set during ISF prole adjustment.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Eos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Eos in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info