768191
28
Zoom out
Zoom in
Previous page
1/48
Next page
R699900 - Eos Series User Manual
3D CONTENT AND 3D pROjECTION
28
3D video inputs limitations
When a 3D Signal is input, the following settings are automatically disabled:
Menu => Picture Adjust => MPC e-shift => 8K e-shift interpolation is turn Off (Eos Signature only)
Menu => Picture Adjust => Motion Control => Motion Enhance is turn Off
11.3  Operating the 3D Glasses
(B) Power button
(B) Power button
Indicating LED (A)
Optical Lenses
Indicating LED (A)
Optical Lenses
(C) 3-Positions button
Micro USB slot
RF 3D Glasses
Charging the 3D Glasses
The 3D Glasses come with a USB rechargeable battery that is charged using the USB to micro USB cable.
Connect the cable to the micro USB slot. The indicating LED (A) will light On red continuously during the charge.
The glasses are fully charged when the indicating LED (A) switches Off.
Turning On your 3D Glasses
Press the Power Button (B) once.
The indicating LED (A) will light On and the Optical Lenses will blink alternately left and right to indicate that
they are ready to synchronize with the 3D synchro emitter.
Due to software limitations, the 3-Positions button (C) is inactive.
Turning Off your 3D Glasses
To turn Off the glasses, press and hold the Power button (B) for 3 seconds until the indicating LED (A) switches
Off. The glasses will also automatically switch Off after 5 minutes that the 3D synchro signal has stopped.
3D Glasses battery level
The battery allows up to 75 hours of continuous power. A low power level, below 30%, is indicated by a single
ash of the Indicating LED (A) at the 3D glasses switch On. Power level between 30% and 90% is indicated by 2
ashes. 3 ashes indicates that the power is above 90%
Auto Power Off
The 3D Glasses are programmed to automatically stop functioning after 5 minutes of immobilization or 10 minutes
without a 3D synchro signal. To turn them back On, just press the Power Button (B) once.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Eos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Eos in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info