Manual DreamVision Dreamy Geek II (page 5 of 28) (English)

768194

Zoom out

Zoom in

1/28

Important SafeguardS

R699854 - Dreamy Geek 2 User Manual 5

Regional Specic Information

CE mark and Directive 2011/65/EU - ROHS 2 (Europe only)

In accordance with Article 7 and the adoption into national law by 2nd January 2013, this product has been

designed and manufactured in accordance with Article 4. The technical documentation and the written declaration

of conformity that assesses the product conformity can be provided to the competent National Authority upon an

email request to: rohs2@dreamvision.net

Information for Users on Disposal of Old Equipment

This symbol indicates that the electrical and electronic equipment should not be disposed as general

household waste at its end of life. Instead, the product should be handed over to the applicable

collection point for the recycling of electrical and electronic equipment for proper treatment, recovery

and recycling in accordance with your national legislation.

By disposing of this product correctly, you will help to conserve natural resources and will help

prevent potential negative effects on the environment and human health which could otherwise be caused by

inappropriate waste handling of this product.

For more information about collection point and recycling of this product, please contact your local municipal

ofce, your household waste disposal service or the shop where you purchased the product. Penalties may be

applicable for incorrect disposal of this waste, in accordance with national legislation.

Other Countries outside the European Union:

If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules

in your country for the treatment of old electrical and electronic equipment.

FCC Information (USA only)

Changes or modication not approved by Dreamvision could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

1.0 IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to

assure your personal safety. IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE

HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules

for its installation, use and service.

The power input is auto-ranging from 100 to 240 VAC.

• Place this product near a wall outlet where the plug can be easily unplugged.

• Do not use this product near water and to prevent re or shock hazards, do not expose this appliance to rain

or moisture.

• Do not use immediately after moving from a low temperature to high temperature, as this causes condensation,

which may result in re, electric shock, or other hazards.

• Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury

to a child or adult, and serious damage to the product. The product should be mounted according to the

manufacturer’s instructions

• This product should be operated only with the type of power source indicated on the label. If you are not sure

of the type of power supply to your home, consult your product dealer or local power company.

• For added protection of this product during a lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to

the product due to lightning and power line surges.

• Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can

result in a risk of re or electric shock.

• Slots and openings are provided for ventilation to ensure reliable operation and to protect this unit from

overheating. These openings must not be blocked or covered.

• Never push objects of any kind into this product through openings as they may touch dangerous voltage

points or short out parts that could result in a re or electric shock. Never spill liquid of any kind on the product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Dreamy Geek II in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DreamVision Dreamy Geek II Manual

Product: