768190
36
Zoom out
Zoom in
Previous page
1/44
Next page
8.0 MAINTENANCE
36 R699740 - DreamBee User Manual
LED Warning
If abnormality occurs in this unit during projection, the warning LED will light On, and the type of abnormality will be
indicated by a combination of indicators at the rear of this unit.
When the unit enters in Warning Mode, it will automatically stop projection and run the cooling fan for about
60 seconds.
Actions to be taken upon warning indications
No. OPERATING LED SIGNIFICATION
STANDBY/ON LAMP WARNING
1 - Light On - Lamp time exceeds 1900 hours.
2 - Light On - Lamp time exceeds 2000 hours and need
replacement.
3 - Blinking Light On Lamp error during startup.
4 - Blinking Light On Lamp error during projection.
5 - - Light On Microprocessor circuit error.
6 - - Light On Drive circuit error.
7 - Blinking Light On Lamp cover is removed.
8 - - Light On Internal temperature is too high.
9 - - Light On External temperature is too high.
10 - - Light On Cooling Fan speed error.
No. SIGNIFICATION ACTIONS TO BE TAKEN
1 Lamp time exceeds 1900 hours. Get prepared a new lamp for replacement.
2Lamp time exceeds 2000 hours and need
replacement. Replace the lamp with a new one, see “Procedure for
Lamp Replacement”, page 34.
3 Lamp error during startup. Turn ON the power again.
4 Lamp error during projection. Check that an impact shock has not occurred during
projection, then turn ON again.
5 Microprocessor circuit error. Turn ON the power again.
6 Drive circuit error. Turn ON the power again.
7 Lamp cover is removed. Check that the lamp unit and lamp cover are correctly
installed and turn ON the power.
8 Internal temperature is too high. Check that nothing is blocking the air inlets and leave
the unit until it cool down. Then turn ON the power.
9 External temperature is too high. Check that the external temperature is normal and
leave the unit until it cools down. After that, turn ON
the power again.
10 Cooling Fan speed error. Leave the unit until it cools down, then turn ON the
power again.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision DreamBee at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision DreamBee in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info