Manual Draytek VigorSwitch P1280 (page 54 of 120) (English)

680245

Zoom out

Zoom in

1/120

VigorSwitch P1280 User’s Guide

Apply Save the settings or changes to the switch.

After clicking it, the settings configured above will be shown

on the table below.

Admin Enable YES – Such port is managed by VigorSwitch.

Edit Click it to modify the settings for the selected GE port.

This page allows you to configure required information to negotiate with other VigorSwitch

for determining the bridge switch.

Available settings are explained as follows:

Item Description

Priority Specify the bridge priority. The valid range is from 0 to 61440,

and the value should be the multiple of 4096. It ensures the

probability that the switch is selected as the root bridge, and

the lower value has the higher priority for the switch to be

selected as the root bridge of the topology.

Forward Delay Specify the STP forward delay time, which is the amount of

time that a port remains in the Listening and Learning states

before it enters the Forwarding state. Its valid range is from 4

to 10 seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch P1280 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Draytek VigorSwitch P1280 Manual

Product: