680242

Draytek VigorSwitch G2280 Manual

80
Zoom out
Zoom in
Previous page
1/211
Next page
VigorSwitch G2280 User’s Guide
72
Query Robustness – Set a number which allows tuning for the
expected packet loss on a subnet.
Query Interval – Specify the time interval for VigorSwitch to
send out general MLD query to the host (responsible for
responding). Later, based on the response, VigorSwitch can
forward the traffic through ports in VLAN.
Query Response Interval – Specify the time interval for
VigorSwitch to receive the query response from the host. If
time is up and no response received, the packets will be
blocked and discarded.
Last Member Query Counter – After quering for specified
times (defined here) and still not receiving any response from
the subscribed member, VigorSwitch will stop transmitting
data to the related GE port(s).
Last Member Query Interval – The maximum time interval
between counting each member query message with no
responses from any subscribed member.
Immediate Leave – Click Enable to enable the function of
immediate leave. When the GE/LAG port receives the leave
message, it will be removed from multicast group to speed up
leave latency.
OK - Apply the settings to the switch.
Cancel - Close the page and return to previous page.
I
I
I
I
-
-
7
7
-
-
4
4
-
-
2
2
M
M
L
L
D
D
S
S
t
t
a
a
t
t
i
i
c
c
G
G
r
r
o
o
u
u
p
p
The MLD static group is allowed to assign a VLAN/port as a specific IPv6 multicast member.
Every IPv6 multicast stream that belongs to the specified group IP address will be forwarded
to the specified port/VLAN member.
Available settings are explained as follows:
Item Description
VLAN ID Use the drop down list to specify a VLAN profile (created in
Switch LAN>>VLAN Management>>Create Vlan) as MLD
Static Group.
However, if State in MLD Setting is not set as Enabled, such
option will be disabled and no ID can be selected.
Group IP Address It is an identifier for the group member. Packets sent to such
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek VigorSwitch G2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch G2280 in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info