680239
73
Zoom out
Zoom in
Previous page
1/83
Next page
VigorSwitch G1240 User’s Guide
67
root port and designated port. The switch with the highest
priority (lowest numeric value) becomes the STP root
switch. If all switches have the same priority, the switch
with the lowest MAC address will then become the root
switch. Select a vale from the drop-down list box.
The lower the numeric value you assign, the higher the
priority for this system.
Default: 32768
Hello Time (1-10 sec): This is the time interval in seconds between BPDU
configuration message generations by the root switch.
The allowed range is 1 to 10 seconds.
Default: 2
Max. Age (6-40 sec): This is the maximum time a switch can wait without
receiving a BPDU before attempting to reconfigure.
The allowed range is 6 to 40 seconds.
Default: 20
Forward Delay (4-30 sec): This is the maximum time (in seconds) a switch will wait
before changing states. The general rule: 2 * (Forward
Delay – 1) >= Max Age >= 2 * (Hello Time + 1)
Default: 15
Force version: Select RSTP or STP protocol from the drop-down list
box.
Function name:
RSTP Port Configuration
Function description:
Enable or disable RSTP protocol on the ports that are selected and set path cost.
Parameter description:
Protected Enabled:
Just tick the check box () beside the port x to enable
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek VigorSwitch G1240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch G1240 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info