680239

Draytek VigorSwitch G1240 Manual

68
Zoom out
Zoom in
Previous page
1/83
Next page
VigorSwitch G1240 User’s Guide
62
connected to the supplicant and under 802.1x control is in the authorized state. The
supplicant and other devices connected to this port can access the network. If the
authenticator receives a Radius-Access-Reject, it will send an EAP-Failure to the
supplicant. This means the supplicant is failed to authenticate. The port it connected is
in the unauthorized state, the supplicant and the devices connected to this port won’t be
allowed to access the network.
10. When the supplicant issue an EAP-Logoff message to Authentication server, the port
you are using is set to be unauthorized.
The 802.1X “Enabled” is the type of authentication supported in the switch. In this mode,
for the devices connected to this port, once a supplicant is authorized, the devices
connected to this port can access the network resource through this port.
802.1x Port-based Network Access Control function supported by the switch is little bit
complex, for it just support basic “Enabled” mode, which can distinguish the device’s
MAC address and its VID. The following table is the summary of the combination of the
authentication status and the port status versus the status of port mode, set in 802.1x Port
mode, port control state, set in 802.1x port setting. Here Entry Authorized means MAC
entry is authorized.
Port Mode Port Control Authentication Port Status
Disable Don’t Care Don’t Care Port Uncontrolled
Enabled Auto Successful Port Authorized
Enabled Auto Failure Port Unauthorized
Enabled ForceUnauthorized Don’t Care Port Unauthorized
Enabled ForceAuthorized Don’t Care Port Authorized
Function name:
802.1X Configuration
Function description:
This function is used to configure the global parameters for RADIUS authentication in
802.1x port security application.
Parameter description:
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek VigorSwitch G1240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch G1240 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info