680233

Draytek Vigor AP 910C Manual

90
Zoom out
Zoom in
Previous page
1/266
Next page
VigorAP 910C User’s Guide
82
power saving job.
Power Saving Mode – Choose this item to get into the power
saving status when there is no data passing through the access
point.
RTS Threshold
Set the RTS threshold of wireless radio. Do not modify default
value if you don’t know what it is, default value is 2347.
Fragment Threshold
Set the Fragment threshold of wireless radio. Do not modify
default value if you don’t know what it is, default value is
2346.
Security Mode
802.11 standard defines two mechanisms for authentication of
wireless LAN clients: Open Authentication and Shared Key
Authentication.
Choose one of the security modes from the drop down list. If
you choose OPEN or SHARED, you have to type WEP
information.
OPEN – Open authentication is basically null authentication
algorithm, which means that there is no verification of the
user.
SHARED – It works similar to Open authentication with only
one major difference. If you choose OPEN with WEP
encryption key, the WEP keys is used to encrypt and decrypt
the data but not for authentication. In Shared key
authentication, WEP encryption will be used for
authentication.
If you choose WPA-Personal or WPA2-Personal, the
corresponding WPA settings will be listed as follows. You
have to choose the WPA algorithms and type the pass phrase
for such security mode.
WPA Algorithms – Choose Temporal Key Integrity Protocol
(TKIP) or AES for data encryption.
Pass Phrase – Please type 8 to 63 alphanumerical characters
here.
WEP
WEP Key Length - WEP (Wired Equivalent Privacy) is a
common encryption mode. It is safe enough for home and
personal use. However, if you need higher level of security,
please consider using WPA encryption (see next section).
Some wireless clients do not support WPA, but support WEP.
Therefore WEP is still a good choice for you if you have such
kind of client in your network environment.
WEP Key Entry Method - There are two types of WEP key
… 90 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor AP 910C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor AP 910C in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info