680232
119
Zoom out
Zoom in
Previous page
1/153
Next page
113
Item Description
Enable RADIUS Server Check it to enable the internal RADIUS server.
Authentication Type Let the user to choose the authentication method for RADIUS server.
Radius EAP Type – There are two types, PEAP and EAP TLS, offered for
selection. If EAP TLS is selected, a certificate must be installed or must be
ensured to be trusted.
Users Profile Username – Type a new name for the user profile.
Password – Type a new password for such new user profile.
Confirm Password – Retype the password to confirm it.
Configure
Add – Make a new user profile with the name and password specified
on the left boxes.
Cancel – Clear current settings for user profile.
Delete Selected – Delete the selected user profile (s).
Delete All – Delete all of the user profiles.
Authentication Client This internal RADIUS server of VigorAP 903 can be treated as the external
RADIUS server for other users. Specify the client IP and secret key to make
the wireless client choosing VigorAP 903 as its external RADUIS server.
Client IP – Type the IP address for the user to be authenticated by
VigorAP 903 when the user tries to use VigorAP 903 as the external
RADIUS server.
Secret Key – Type the password for the user to be authenticated by
VigorAP 903 while the user tries to use VigorAP 903 as the external
RADIUS server.
Confirm Secret Key – Type the password again for confirmation.
Configure
Add – Make a new client with IP and secret key specified on the left
boxes.
Cancel – Clear current settings for the client.
Delete Selected – Delete the selected client(s).
Delete All – Delete all of the clients.
Backup Click it to store the settings (RADIUS configuration) on this page as a file.
Restore Click it to restore the settings (RADIUS configuration) from an existed file.
After finishing this web page configuration, please click OK to save the settings.
IV-1-2 Certificate Management
When the local client and remote server are required to make certificate authentication (e.g., Radius
EAP-TLS authentication) for wireless connection and avoiding the attack of MITM, a trusted root certificate
authority (Root CA) will be used to authenticate the digital certificates offered by both ends.
However, the procedure of applying digital certificate from a trusted root certificate authority is
complicated and time-consuming. Therefore, Vigor AP offers a mechanism which allows you to generate
root CA to save time and provide convenience for general user. Later, such root CA generated by DrayTek
server can perform the issuing of local certificate.
Root CA can be deleted but not edited. If you want to modify the settings for a Root CA, please delete the
one and create another one by clicking Create Root CA.
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor AP 903 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor AP 903 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info