680232
97
Zoom out
Zoom in
Previous page
1/153
Next page
91
ACS (Auto Configuration Server) you want to link. Please refer to Auto
Configuration Server user’s manual for detailed information.
Test With Inform – Click it to send a message based on the event code
selection to test if such CPE is able to communicate with VigorACS SI
server.
Event Code – Use the drop down menu to specify an event to perform the
test.
Last Inform Response Time – Display the time that VigorACS server
made a response while receiving Inform message from CPE last time.
CPE Settings
Such information is useful for Auto Configuration Server (ACS).
Enable– Check the box to allow the CPE Client to connect with Auto
Configuration Server.
SSL(HTTPS) Mode - Check the box to allow the CPE client to connect
with ACS through SSL.
On – Choose the interface (LAN-A or LAN-B) for VigorAP 903 connecting to
ACS server.
Port – Sometimes, port conflict might be occurred. To solve such problem,
you might change port number for CPE.
Username/Password – Type the username and password that VigorACS
can use to access into such CPE.
Periodic Inform
Settings
The default setting is Enable. Please set interval time or schedule time for
the AP to send notification to VigorACS server.
Interval Time – Type the value for the interval time setting. The unit is
“second”.
STUN Settings The default is Disable.
If you click Enable, please type the relational settings listed below:
Server Address – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the CPE must send
binding request to the server for the purpose of maintaining the binding in
the Gateway. Please type a number as the minimum period. The default
setting is “60 seconds”.
Maximum Keep Alive Period – If STUN is enabled, the CPE must send
binding request to the server for the purpose of maintaining the binding in
the Gateway. Please type a number as the maximum period. A value of
“-1” indicates that no maximum period is specified.
After finishing this web page configuration, please click OK to save the settings.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor AP 903 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor AP 903 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info