• You will be able to move forward and back through the installation process by choosing
the
Next and Back buttons at the bottom of the window.
• A number of options will appear during the installation process. You must select the
options that tell the program:
o You wish it to search for a driver.
If you do not tell it to search for a driver, it will display a list that you will have
to search through yourself. This list will be long and hard to understand, and it
might not contain the correct driver.
o You will specify the location (or one of the locations) to search.
The program normally will not search on “removable media” such as a floppy
disk. You must tell it in advance that you wish it to do so.
o The location to search is a folder on the installation CD (assuming the CD
drive is E:).
The
installation CD contains three folders. When the program displays a text
input box for specifying a location, type in the name of the folder that
corresponds to your version of Windows. Type e:\Vigor520\win2k if you are
using Windows 2000. Type e:\Vigor520\win98 if you are using Windows 98 or
Windows ME. Type e:\Vigor520\winxp if you are using Windows XP.
• Always read everything in the window carefully, and make sure the correct options are
selected, before choosing
Next.
• Avoid common mistakes. Be sure to —
o Insert the installation CD at a suitable time (either when the program window
appears, or when you type a folder name into the location box).
o Insert the installation CD.
o Type a backslash [\] after “a:” when specifying the location of the driver (do not
type a slash [/]).
For step-by-step instructions, see the appropriate part of the next section.
4.2 Installation Details
Microsoft Windows 98:
1. Insert the adapter. Windows 98 will detect the adapter and start the Add New Hardware
Wizard.
2. Choose
Next.
3. Select “Search for the best driver for your device” and choose
Next.
8
