680221

Draytek Vigor 2862 LTE Series Manual

173
Zoom out
Zoom in
Previous page
1/988
Next page
Vigor2862 Series User’s Guide
15
7
configuration Prefix Length – Type the fixed value for prefix length.
Add – Click it to add a new entry.
Delete – Click it to remove an existed entry.
Unique Local Address
(ULA) configuration
Unique Local Addresses (ULAs) are private IPv6 addresses
assigned to LAN clients.
Off - ULA is disabled.
Manually ULA Prefix - LAN clients will be assigned ULAs
generated based on the prefix manually entered.
Auto ULA Prefix - LAN clients will be assigned ULAs using an
automatically-determined prefix.
Current IPv6 Address
Table
Display current used IPv6 addresses.
DNS Server IPv6 Address Deploy when WAN is up – The RA (router advertisement)
packets will be sent to LAN PC with DNS server information
only when network connection by any one of WAN interfaces
is up.
Enable – The RA (router advertisement) packets will be sent
to LAN PC with DNS server information no matter WAN
connection is up or not.
Primary DNS Sever – Type the IPv6 address for Primary
DNS server.
Secondary DNS Server –Type another IPv6 address for
DNS server if required.
Disable – DNS server will not be used.
Management Configures the Managed Address Configuration flag (M-bit) in
Route Advertisements.
Off - No configuration information is sent using Route
Advertisements.
SLAAC(stateless) - M-bit is unset.
DHCPv6(stateful) - M-bit is set, which indicates to LAN
clients that they should acquire all IPv6 configuration
information from a DHCPv6 server. The DHCPv6 server
can either be the one built into the Vigor2860, or a
separate DHCPv6 server.
Other Option (O-bit) - Check this box to enable the O-bit for
obtaining additional information (e.g., DNS) from DHCPv6.
DHCPv6 Server Enable Server –Click it to enable DHCPv6 server. DHCPv6
Server could assign IPv6 address to PC according to the
Start/End IPv6 address configuration.
Disable Server –Click it to disable DHCPv6 server.
Auto IPv6 range – After check the box, Vigor router will
assign the IPv6 range automatically.
Start IPv6 Address / End IPv6 Address –Type the start and
… 173 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2862 LTE Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2862 LTE Series in the language / languages: English as an attachment in your email.

The manual is 15,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info