680221

Draytek Vigor 2862 LTE Series Manual

165
Zoom out
Zoom in
Previous page
1/988
Next page
Vigor2862 Series User’s Guide
149
Subnet Mask - The subnet mask, together with the IP Address
field, indicates the maximum number of clients allowed on
the subnet. (Default: 255.255.255.0/ 24).
LAN IP Alias –Such feature allows specifying multiple
gateways (under a switch) with different WAN interfaces for
accessing the Internet via the Vigor router.
RIP Protocol Control,
Enable – When Enabled, the router will attempt to exchange
routing information with neighbouring routers using the
Routing Information Protocol.
DHCP Server
Configuration
DHCP stands for Dynamic Host Configuration Protocol. The
router by factory default acts a DHCP server for your network
so it automatically dispatches related IP settings to any local
user configured as a DHCP client. It is highly recommended
that you leave the router enabled as a DHCP server if you do
not have a DHCP server for your network.
If you want to use another DHCP server in the network other
than the Vigor Router’s, you can let Relay Agent help you to
redirect the DHCP request to the specified location.
Disable Server – Let you manually assign IP address to every
host in the LAN.
Enable Server - Let the router assign IP address to every host
in the LAN.
Start IP Address - The beginning LAN IP address that is
given out to LAN DHCP clients.
IP Pool Counts - The maximum number of IP addresses
to be handed out by DHCP. The default value is 200.
Valid range is between 1 and 1021. The actual number
of IP addresses available for assignment is the IP Pool
Counts, or 1021 minus the last octet of the Start IP
Address, whichever is smaller.
Gateway IP Address - The IP address of the gateway,
which is the host on the LAN that relays all traffic
coming into and going out of the LAN. The gateway is
normally the router, and therefore the Gateway IP
Address should be identical to the IP Address in the
… 165 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2862 LTE Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2862 LTE Series in the language / languages: English as an attachment in your email.

The manual is 15,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info