680221

Draytek Vigor 2862 LTE Series Manual

139
Zoom out
Zoom in
Previous page
1/988
Next page
Vigor2862 Series User’s Guide
123
Ping Detect - The router sends an ICMP (Internet Control
Message Protocol) echo request every second to the host,
whose address is specified in the Ping IP field, to verify
the WAN connection. If the remote host does not respond
within 30 seconds, the WAN connection is deemed to have
failed.
Primary/Secondary Ping IP – If you choose Ping
Detect as detection mode, you have to type
Primary or Secondary IP address in this field for
pinging.
Ping Gateway IP – If you choose Ping Detect as
detection mode, you also can enable this setting
to use current WAN gateway IP address for
pinging.
With the IP address(es) pinging, Vigor router can
check if the WAN connection is on or off.
TTL – Time To Live, the maximum allowed number
of hops to the ping destination. Valid values range
from 1 to 255.
Ping Interval – Type the interval for the system to
execute the PING operation.
Ping Retry – Type the number of times that the
system is allowed to execute the PING operation
before WAN disconnection is judged.
PPPoE/PPPoA Client ISP
Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Name – PPP Service Name. Enter if your ISP requires this
setting; otherwise leave blank.
Username – Name provided by the ISP for PPPoE/PPPoA
authentication. Maximum length is 62 characters.
Password – Password provided by the ISP for PPPoE/PPPoA
authentication. Maximum length is 62 characters.
PPP Authentication –The protocol used for PPP
authentication.
PAP only- Only PAP (Password Authentication Protocol)
is used.
PAP or CHAP- Both PAP and CHAP
(Challenge-Handshake Authentication Protocol) can be
used for PPP authentication. Router negotiates with the
PPTP or L2TP server to determine which protocol to
use.
Always On – If selected, the router will maintain the
PPPoE/PPPoA connection.
Idle Timeout – Maximum length of time, in seconds, of idling
allowed (no traffic) before the connection is dropped.
ISP Address from ISP - Specifies how the WAN IP address of
the channel configured.
Fixed IP
Yes - IP address entered in the Fixed IP Address field
will be used as the IP address of the virtual WAN.
No - Virtual WAN IP address will be assigned by the ISP’s
PPPoE/PPPoA server.
MPoA Obtain an IP address automatically – Select this option if the
router is to receive IP configuration information from a DHCP
… 139 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2862 LTE Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2862 LTE Series in the language / languages: English as an attachment in your email.

The manual is 15,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info