729053

Draytek Vigor 2620 LTE series Manual

590
Zoom out
Zoom in
Previous page
1/610
Next page
Vigor2620 Series User’s Guide
578
<mode><key><index> connection.
<SSID_NUMBER>: Enter 1, 2, 3 or 4 to specify SSID1, SSID2,
SSID3 or SSID4.
<mode>: Available settings are:
disable: No security.
wpa1x: WPA/802.1x Only
wpa21x: WPA2/802.1x Only
wpamix1x: Mixed (WPA+WPA2/802.1x only)
wep1x: WEP/802.1x Only
wpapsk: WPA/PSK
wpa2psk: WPA2/PSK
wpamixpsk: Mixed (WPA+WPA2)/PSK
wep: WEP
<key>: Enter a string. You have to add keys for wpapsk,
wpa2psk, wpamixpsk and wep, and specify index number of
schedule profiles to be followed by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26
Hexadecimal digit format; WPA keys must be in 8~63 ASCII
text string or 64 Hexadecimal digit format.
<index>: Enter an index number.
ratectl
<ssid_num><enable>
<upload download>
It means to set the rate control for the specified SSID.
<ssid_num>: Enter 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3
or SSID4.
<enable>: Enter 0 or 1. It means to enable the function of the
rate control for the specified SSID. 0: disable and 1:enable.
<upload>: Enter a value. It means to configure the rate
control for data upload. The unit is kbps.
<download>: Enter a value. It means to configure the rate
control for data download. The unit is kbps.
Isolate <ssid_num> <lan
member>
It means to isolate the wireless connection for LAN and/or
Member.
<ssid_num>: Enter 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3
or SSID4.
<lan> – It can make the wireless clients (stations) with
remote-dial and LAN to LAN users not accessing for each
other. Enter 1 to enable, or 0 to disable.
<member> – It can make the wireless clients (stations) with
the same SSID not accessing for each other. Enter 1 to
enable, or 0 to disable.
dtim <value> <value>: Enter a number (1 ~255) to set DTIM.
beaconperiod <value> <value>: Enter a number (20 ~1023, unit in milli-seonds) as
beacon period.
radio <enable> <enable>: Enter 1 or 0 to enable or disable the wireless
radio.
frag <value> <value>: Enter a number (256 ~2346) to set fragment
threshold.
rts <value> <value>: Enter a number (1 ~2347) to set RTS threshold.
rate_alg <value> <value>: Enter 0, or 1 to set the version of rate algorithm.
0, old algorithm
1, new algorithm
… 590 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2620 LTE series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2620 LTE series in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info